User manual KETTLER CTR 1

[. . . ] for Your Safety Cross-Trainer should be used only for its intended purpose, i. Any other use of the equipment is prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment. exercise has been designed in accordance with the latest standards of safety. [. . . ] It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. The Cross-Trainer is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. On principle, the equipment does not require any special maintenance. All bearings are pre-lubricated (further lubrication is not required) and require little maintenance. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. The Cross-Trainer has a brake system, which require little maintenance and does not require any adjusting work. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when working with tools or doing manual work. [. . . ] Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. [. . . ]