User manual KETTLER CTR2

[. . . ] The crosstrainer should be used only for its intended purpose, Any other use of the equipment is prohibited and may be dan- If the equipment is in regular use, check all its components The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment. This is particularly true for the attachment of grip strap, running plate and fastening of the handlebar and front tube. To ensure that the safety level is kept to the highest possible Any features which may have been a possible cause of injury have been avoided or made as safe as possible. [. . . ] Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. The machine is designed for use by adults and children should Not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The crosstrainer complies with the DIN EN 957 - 1/9, class Before use, always check all screws and plug-in connections as Well as respective safety devices fit correctly. Please do not leave especially radiation-intensive appliances (e. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. Ensure that you have received all the parts required (see check The fastening material required for each assembly step is sho- Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully Use the fastening material exactly as instructed. The required tools are supplied with the equipment. Bolt all the parts together loosely at first, and check that they And carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. The equipment must be assembled with due care by an adult If in doubt call upon the help of a second person, if possible technically talented. Please note that there is always a danger of injury when wor- King with tools or doing manual work. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). [. . . ] ) is required, this should be clearly stated on the order by adding the words , , with fastening material". Waste Disposal KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites). [. . . ]