User manual KETTLER ERGOCOACH

[. . . ] For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. If the equipment is in regular use, check all its components thoroughly every 1 ­ 2 months. pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbars. [. . . ] Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by KETTLER. Always observe the general safety rules and precautions for working with electrical equipment. Before beginning your program of training, study the instructions for training carefully. Our products are subject to a constant innovative quality assurance. The unit should be positioned in such a way that there is a space of 100 cm on both sides and 150 cm behind it. Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The unit complies with the EN 975-1 +A1:1998; EN 9757:1998, class SA. the appliance has undergone Class S (= studio) testing. If the appliance is not intended for domestic use, please note that the onus is on the owner to ensure that the appropriate measures are put in place with respect to accessibility and supervision. The appliance may only be operated in public places under qualified supervision. Pend on who the users are: their degree of reliability, age, experience, etc. Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit. A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. [. . . ] Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. [. . . ]