User manual KETTLER ERGORACER GT

[. . . ] For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. I If the equipment is in regular use, check all its components thoroughly every 1 -2 months. pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbars. [. . . ] I Before beginning your program of training, study the instructions for training carefully. I In choosing the location of the apparatus, ensure a sufficient safety distance from any obstacles. the apparatus must not be mounted in the immediate vicinity of main passageways (paths , doorways , corridors). I For a comfortable training position please adjust the handlebar andsaddle position to your body height. I Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. I It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. I The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. I The exercise cycle complies with the DIN EN 957 - 1/- 5 class HA. it is therefore suitable for therapeutic use. I Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit. I A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe. I Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. I Always wear suitable shoes when using. I Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. I Nobody may be in the moving range of a training person during training. I Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. [. . . ] At the end of its useful life please dispose of this article correctly and safely (local refuse sites). When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see handling). Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible. [. . . ]