User manual KETTLER EX 1

[. . . ] For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. If the equipment is in regular use, check all its components thoroughly every 1 -2 months. pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbars. [. . . ] Always observe the general safety rules and precautions for working with electrical equipment. Before beginning your program of training, study the instructions for training carefully. Our products are subject to a constant innovative quality assurance. In choosing the location of the apparatus, ensure a sufficient safety distance from any obstacles. the apparatus must not be mounted in the immediate vicinity of main passageways (paths , doorways , corridors). For a comfortable training position please adjust the handlebar andsaddle position to your body height. Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The exercise cycle complies with the DIN EN 957 - 1/5, class HA. it is therefore suitable for therapeutic use. Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit. A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. The product is not suitable for use by persons weighing over 110 kg. Ensure that you have received all the parts required (see check list) and that they are undamaged. [. . . ] Grip the pedal arm tightly, and screw in an M12 bolt (not supplied) into the thread (B). After a few turns you may take off the pedal arm (C). For technical reasons, we reserve the right to carry out preliminary assembly work (e. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. [. . . ]