User manual KETTLER FAVORIT

[. . . ] Damaged components may endanger your safety or reduce the For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. in case of enquiry , please contact your Kettler dealer. If the equipment is in regular use, check all its components thoroughly every 1 ­ 2 months. pay particular attention to the tightness of bolts and nuts. [. . . ] Care should be taken that the oil does not drip onto the floor!After a longer period of disuse, the hydraulic absorbers may not achieve their best performance at once. Before beginning exercising or after a period of disuse, it is recommended to activate the absorbers by several pumping movements. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. When training intensivly shock absorbers may become very hot. Please avoid contact and do not touch the shock absorbers after training. Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. The fastening material required for each assembly step is shown in the diagram inset. [. . . ] Clamps at lowest knurled marker=lowest power level Clamps at highest knurled marker=highest power level When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this should be clearly stated on the order by adding the words , , with fastening material". If the computer is too faint to read or disappears completel, the batteries must be changed. [. . . ]