User manual KETTLER KABRIO

[. . . ] This product is a toy and is not suitable for use in traffic or on public roads. Damaged components may endanger the safety of the user or shorten the lifespan of the product. Inspect it at regular intervals to ensure that none of the components are damaged and that none of the bolts or other joints have worked loose. Replace worn or damaged parts immediatlely and ensure that the product is not used again until this has been done. [. . . ] Do not transport any objects on the kettcar. When children are at play, situations may arise which cannot be predicted by the manufacturer and for which he cannot be held responsible. Although dangerous situations are unlikely to occur if the toy is used correctly, children at play should, if possible, be supervised. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause pollution of the environment. Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or three months. Due to the nature of materials used in pneumatic tyres on KETTLER toys, it is not recommended for the product to be left in any one place for too long where solvents or other chemicals, i. This may result in a chemical reaction, which could cause the tyres to mark the surface such as a vinyl flooring. If in doubt put something underneath the wheels to cover the floor. Assembly of the toy vehicle The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions carefully before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the safe function and use of the Kettcar. 2 Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags! Bolt all the parts together loosely at first, and check that they have been assembled correctly. [. . . ] for Ø 10 mm) rear running wheel (with cap, hex. for Ø 13 mm) drive wheel (with cap, hex. for Ø 13 mm wheel cap steering rod steering wheel bolt set for steering wheel steering column support bar steering wheel cap steering column casing bolt set upper chainguard with screws bottom bracket bearing with pedals and rapid attachment for Ø 10 mm plastic block pedal axle bearing for Ø 10 mm bearing clip for axle bearing Ø 10 mm gear lever with grip grip for lever plug (flat edge ) for Ø 25 mm rear axle (complete with nuts, bolts etc. ) chain (88 links) with lock axle bearing for Ø 13 mm bearing clip for axle bearing Ø 13 mm brake lever (with size 8 grip and cap) brake grip for Ø 8 mm bearing clip for brake lever lower chainguard with screws molded seat packet of bolts, nuts, etc. seat adjustment mechanism seat adjustement limiter quantity 1 1 2 2 1 1 4 2 4 1 1 1 1 1 1 1 1 1 2 2 2 1 1 2 1 1 2 2 1 1 2 1 1 1 2 1 part. [. . . ]