User manual KETTLER KOMBI SET

[. . . ] Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by KETTLER. Always observe the general safety rules and precautions for working with electrical equipment. Before beginning your program of training, study the instructions for training carefully. [. . . ] Any features which may have been a possible cause of injury have been avoided or made as safe as possible. Removal or replacement of original parts) may endanger the safety of the user. Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. If the equipment is in regular use, check all its components thoroughly every 1 ­ 2 months. pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbar. To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers. Instruct persons using the equipment (in particular children) on possible sources of danger during exercising. The unit requires a power supply of 220-230 V/50 Hz. It should be connected only to a safety socket with a single 10-A fuse. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. [. . . ] Raadpleeg alvorens met de training te beginnen uw huisarts en vraag of de training met dit apparaat voor u geschikt is. ATTENTION: Ensure correct polarity; if the battery is inserted wrong, it will cause damage to the remote control!If time and/or date deviate considerably although they were reset recently the battery should be changed. Battery with the correct type: 3VLithium CR2032. [. . . ]