User manual KETTLER NEVADA K6 XG

[. . . ] I This product is designed only for private use (no commercial or public use). i This product is suitable for children starting at 8 years. I This Kettcar is designed for persons with a maximum weight of 75 kg. I This product may only be used for the intended purpose, i. [. . . ] I For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on floors containing solvents or which have been glued with such solvents (e. PVC) they may possibly stain it due to a chemical reaction with the natural product caoutchouc. If in doubt place something underneath the wheels. Ensure that air pressure in the tyres is correct (1, 5 bar/20 PSI); if air pressure is too low this increases wear, and makes riding the toy more difficult!I The Kettcar Nevada II is equipped with a 7-speed hub gear which can be used to adjust the pedalling resistance for different terrain types by turning the handle. 1st gear / low pedalling resistance = for starting and pedalling uphill up to 7th gear / highest pedalling resistance fast riding on level ground. I It is particularly important to teach children how to correctly operate the brakes. the hand brake acts on both rear wheels and is lockable (parking brake). This brake is better suited For emergency braking than the back-pedal brake which only acts on one rear wheel and should therefore only be used for slowing down from moderate speeds. the back-pedal brake is , unlike the back-pedal brakes of bicycles , also suitable for driving backwards. That means that the driven wheel can turn backwards when the brake is used heavily. I The wheeled toy vehicle must be assembled carefully by an adult person. Study the assembly instructions carefully before beginning work. assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the safe function and use of the toy vehicle. I Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. I Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!I Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). [. . . ] complete the input at the desired value. When changing to the odometer display, this value will be accepted. The electronics recognises low battery voltage and displays it by means of LOBatt. You should change the batteries not later than at this moment. [. . . ]