User manual KETTLER PEDAL RACER

[. . . ] Always keep a watchful eye on your child in order to avoid risks by thoughtless and hasty movements. This product is suitable for children between 4-7 years with a body weight up to 75 lbs. The wheeled toy does not contain lights. Please ride during daylight, never in the dark. [. . . ] Instruct your child how to use the vehicle correctly and draw attention to possible sources of danger. Children at play should always be supervised. The seat of this product can be adjusted to your child's size. 2 USA Assembly Instructions Please bear in mind that there is always a danger of children injuring themselves while using swings, climbing frames, toy vehicles or similar equipment. When riding the toy, the child should always wear covered footwear (no open toe shoes or barefoot riding). When children are at play, situations may arise which cannot be predicted by the manufacturer and for which he cannot be held responsible. Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause pollution of the environment. For models with air tires, check air pressure periodically (see tire for recommended psi) Due to the nature of materials used in air tires on Racer by Kettler® toys, it is not recommended that the product to be left in any one place for too long where solvents or other chemicals, i. This may result in a chemical reaction, which could cause the tires to mark the surface such as a vinyl If in doubt put something underneath the wheels to cover Lubricate the bearing sleeves of the wheels with a few drops of oil every two to three months. Assembly of the Pedal Car Please ensure that the vehicle will only be used for playing when assembly has been carried out correctly, and checked, by an adult. The toy vehicle must be assembled by an adult person. Study the assembly instructions carefully before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the diagrams. The vehicle will function as designed when correctly assembled. Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose of packaging material in such a way that it may not cause any danger. There is always a risk of if children play with plastic bags!Bolt all the parts together loosely at and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use the wrench to tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened rmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. [. . . ] The use of protective gear and a bike helmet is highly recommended. Excessive weight may cause a hazardous or unstable condition. Model # 8881-540 Racer by Kettler®· 1355 London Bridge Road · Virginia Beach, VA 23453 www. kettlerusa. com 4 5 Checklist 1/1 1 1 1 1 1 2 M8 1 1 1 12 1 Ø 8/20 Ø 8/16 1 2 2 M5 12 2 6 4 2 2 1 M 5 X 53 M 5 X 45 1 1 1 1 6 M 5 X 30 M 5 X 27 3, 9 X 16mm 1 M5x45 x4 7 2 8 3 B A B A A M5x30 x2 B M5x27 x2 9 4 D A B C B C B 5 M5x53 x2 C M5x45 x2 Ø 8/20 10 6 M8 7 3, 9x16mm x2 11 8 9 12 10 M5x30 x2 11 13 Seat Adjustment B C A 14 Detaching for Repairs and Chain Tightening Remove seat Unscrew upper chain cover in location B Remove upper cover A B C B A Unscrew lower cover in location A and remove 15 Chain Tightening and Re-Attachment A B C Loosen 4 screws and nuts at location A Slide pedal sprocket forward (B) and tighten screws (A) simultaneously to tighten chain If chain is off, slide pedal sprocket back (C) and place chain on sprockets, then tighten chain. 16 Spare parts drawing RACER Pedal Car Model# 8881-540 15 12 13 10 34 16 14 6 11 7 18 31 29 24 32 28 26 29 21 22 25 17 25 3 5 35 2 36 5 38 4 19 1 8 23 27 20 33 20 8 4 9 37 32 28 34 30 4 22 21 39 17 USA Spare parts list for RACER Pedal Car Model #8881-540 pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 description main frame tie rod tie rod pin running wheel spacer sleeve drive wheel wheel cover for drive wheel frame guard wheel screen seat steering wheel rod steering wheel steering wheel bolt set steering column frame steering wheel cap steering column casing grill upper chain guard cover lower chain guard cover pedal crank bearing clamp, pedal crank bearing clutch lever clutch grip plug axle chain axle bearing clamp, axle bearing brake lever brake grip clamp for brake lever pedal crank adjustment mechanism tire rod cover, right tire rod cover, left hubcap front frame rear frame hardware bag qty. [. . . ]