User manual KETTLER TX3 7883 090

[. . . ] VERSO by KETTLER TX1 / TX3 Owner's Manual Foldable Treadmill TX1 7882-090 TX3 7883-090 Retain this owner's manual for future reference. Read and follow all instructions in this owner's manual. Retain this owner's manual for future reference. Read and follow all instructions in this owner's manual. KETTLER® International Inc. [. . . ] Use FAST or SLOW buttons to input workout time 8. Use FAST or SLOW buttons to input target heart rate 10. Press START to begin workout Owner's Manual 17 NOTES: 18 Owner's Manual VI. OPERATING THE CONSOLE TX3 DISPLAY VALUES Display PULSE ELEVATION (%) DISTANCE (Miles) DISTANCE (Km) SPEED (Miles/H) SPEED (Km/H)TX3 TIME CALORIES Resolution XXX XX XX. X XX. X XX. X XX. X XX:XX XXX Range 40-240 0-12 00. 1 ­ 99. 0 00. 1 ­ 99. 0 00. 5 ­ 11. 0 00. 8 ­ 18. 0 00:01 ­ 99:00 1-999 Increment 1 1% 0. 1 0. 1 0. 1 0. 1 00. 01 1 Service required indicator LED dot matrix display window Pulse indicator LCM with backlight message center UP ­ elevation up DOWN ­ elevation down FAST ­ increase speed SLOW ­ decrease speed QUICK START / START ­ two different functions PAUSE ­ press once to pause STOP ­ press twice to stop ENTER - confirm selection or input 0 ~ 9 buttons ­ preset program selections ­ direct speed control during workout Owner's Manual 19 SPEED ADJUSTMENTS There are three ways to adjust speed during workout. FAST and SLOW will adjust speed by increments of 0. 1Km/H. Or you may hold these buttons to ramp up or down. If the speed adjustment increment is large, it is easier to use the number buttons, which function as direct speed control buttons during the workout. Another way to adjust speed is to press the extension-keys on the handle bar cover. Extension-key FAST and SLOW will also adjust speed by increments of 0. 1Km/H. Example: to change from 3 Km/H to 8 Km/H, we could just press the number 8 button once. Also we could press and hold the FAST button or extension-key FAST until the speed display shows 8 Km/H. ELEVATION ADJUSTMENTS For safety reasons, elevation is designed to be manually adjusted only. At no time will treadmill automatically adjust elevation except during one of the following three programs: elevation program, HRC adjust by elevation, and fitness test. Elevation may be adjusted even while the running belt is not moving. However, during the program setup mode, elevation will not be adjustable. There are two ways to adjust elevation during workout: UP and DOWN on the console, extension-key UP and DOWN on the handle bar cover. The buttons will adjust elevation by increments of 1%. PULSE FUNCTION This treadmill features wireless heart rate monitoring, the most advanced technology to date for accurate read out of your heart rate. For convenience, this treadmill is also designed to pick up heart rate info via the contact sensors located on the horizontal handlebar. Treadmill will look for wireless pulse signal first. If no wireless pulse signal is present, then treadmill will look for the signal from contact sensors. To use the wireless pulse monitoring system, you must wear the heart rate transmitter chest strap. Place the contact surface next to your skin directly under your heart to pick up the pulse signals from your heart. The heart rate transmitter strap is an optional purchase and not included with this treadmill. [. . . ] Do that for a few minutes and allow the silicon to soak into the belt. Owner's Manual 29 IX. TROUBLE SHOOTING WHEN TO CALL FOR HELP This treadmill is designed with user safety as the number one priority. In the event of electrical failure, the treadmill will shut off automatically to prevent user injury and to prevent damage to expensive components such as the motor. When you encounter unusual behavior from the treadmill, simply go to the front of the treadmill and turn the power switch off and on to reset the treadmill. [. . . ]