User manual KIDDY ENERGY PRO

[. . . ] This means that the kiddy energy pro is suitable for use in all types of vehicles in any seat with a three-point restraint compliant with ECE 16 or comparable specifications. Use the seat cushions (F) belonging to it for children with a body weight of approximately 9 - 13kg. Otherwise the seating position (protection) would deteriorate in the event of an accident or collision. The child restraint system (A) must always be used with the impact shield (O) belonging to it. [. . . ] The kiddy energy pro is equipped with a reclined position that ensures comfortable and safe seating particularly on longer trips. Pull the kiddy energy pro forward far enough so that the sleeping clamp (D) found on the back of the child seat can be unfolded (Fig. The sleeping clamp (D) must rest against the backrest of the vehicle's seat in its unfolded position. Then slide your kiddy back against your vehicle's backrest. This prevents the seat from sliding backwards (Fig. The kiddy energy pro's backrest (C) is then automatically lowered into the reclined position. The reclined position is reached when the headrest (B) of the child seat rests against the backrest of the vehicle (Fig. Do not attempt to adjust the reclined position during travel. Always bring your vehicle to a complete stop to do this. Unfasten the vehicle restraint, change the position of the sleeping clamp (D) and the backrest (C), and then secure your child (the child restraint system) again. The kiddy energy pro can also be used in rear-facing car seats that are equipped with a three-point restraint system (Fig. The child restraint system (A) kiddy energy pro can be installed in vehicles on any seat with a three-point restraint system (lap and shoulder restraint) (Fig. Please familiarise yourself thoroughly with the use of child restraint systems (A) as described in your vehicle's owner's manual. If the motor-car manufacturer allows child restraint systems on the passenger seat, the seat should be moved to the position furthest back. Push the impact shield (O) into the impact shield guides (G) on the seat section (Fig. Slide the impact shield (O) back so that it rests right on your child's tummy. Then pull your vehicle's three-point restraint out far enough so that it goes around your kiddy and can be directly fastened in your vehicle's own seatbelt lock (Fig. Make sure that the seatbelt tongue locks securely in place with a noticeable "click". Place your child in the seat and ensure that the child's buttocks press against the backrest (C). The kiddy energy pro is secured with the three-point vehicle restraint using the belt guide on the impact shield (Q) (Fig. Check to see whether the seat cushions (F) and headrests (B) are adjusted to the size or body weight of your child (Section 4). Position your kiddy on the vehicle seat as described in Section 5. [. . . ] The warranty covers child restraint systems that have been handled properly and are returned in a clean and orderly condition. The warranty does not cover: - Normal wear and tear and damage due to unreasonable use - Damages due to improper or inordinate usage. The kiddy team wish you and your child a good and safe trip at all times. Fabrics: All of our fabrics meet the highest standards regarding colourfastness against UV radiation. [. . . ]