User manual KIDDY INFINITY PRO

[. . . ] 9 ­ 13 kg (that is approximately an age of 9 - 18 months) the corresponding seat cushion has to be used (see point 4. Follow the recommendations of your vehicle manual or contact your authorised repair shop. Read the instruction manual carefully before fitting the child restraint system for the first time. You risk endangering your child's life if the product is used incorrectly. [. . . ] Go about setting the seat cushion as follows: 13­18 months; seat cushion folded apart (fig. 18 months ­ 4 years; no seat cushion used (fig. In order to achieve the correct setting of the seat position with the seat cushion, you must always position the adjustable headrest properly. 2 Headrest adjustment The kiddy infinity pro offers an individual adjustment to your child's size with its height adjustable headrest. The headrest can be adjusted to the size of your child in 5 levels. Wrong, too low Wrong, too high The correct seat position setting is achieved when the child's head rests in the middle area of the head rest. Move the yellow height adjustable handle on the reverse of the headrest, by pulling it slightly out while at the same time moving the headrest up or down, depending on the height required (fig. Always check that the adjusted parts of kiddy are locked securely in place by pulling on the adjusted part slightly. 3 Setting the sleeping position The kiddy infinity pro is fitted with a sleeping position, which guarantees comfortable and secure seating during longer journeys. To set the sleeping position, first release the vehicle's belt system. Pull the kiddy infinity pro as far forward as possible so that the black supporting clamp, located on the back of the seat part, can be folded back. Then push the kiddy infinity pro against the back rest of the vehicle seat. In its opened state, the supporting clamp must lie against the back rest of the vehicle seat. It prevents the seat from slipping back (fig. The back rest of the kiddy infinity pro can be swivelled into the sleeping position. The sleeping position is then achieved when the back rest of the child seat lies against the vehicle seat rest (fig. Never set the sleeping position during mid journey. Undo the vehicle belt, change the position of the supporting clamp and back rest and then secure your child (the child restraint system) again. To secure the child in the sleeping position, please proceed as described in item 5. Your kiddy infinity pro may only be used with the appropriate impact shield. Once your child is seated, push the impact shield into the guide slots on the seat part (fig. Push the impact shield so that it rests just above your child's stomach. [. . . ] The guarantee period commences on the day of purchase. a sales receipt will be required for complaint. The guarantee is limited to child restraint systems which have been handled appropriately and are returned in clean and sound condition. The guarantee does not extend to: - natural occurrences of wear and tear and damages caused by excessive strain. [. . . ]