User manual KIDDY NEST

[. . . ] Using it incorrectly could pose a risk to the life of your child. Do not make any changes to the kiddy nest, the strap system or any other components of the baby car seat. Make sure that no parts of the kiddy nest or the straps get caught in doors or adjustable seats. Set adjustable backrests so that they come into contact with the holder of the baby car seat. [. . . ] Remove the strap system by pulling the strap ends through their respective openings on the cover. You can then take the cover off the seat. When you put the cover back on, please make sure that the straps are not twisted in the fabric when you thread them back through the openings. Never use the kiddy nest without its original cover. The cover is part of the safety concept. The kiddy nest is not suited for seats that are only equipped with a 2-point seatbelt for your waist. Please use the kiddy nest only on seats that have a 3 - point seatbelt. We recommend using the kiddy nest on the back seat of cars and on the easiest seat to reach in cases of emergencies in vans. Please use the operating handbook in your vehicle to inform yourself about the basics concerning children's seats in vehicles! Some car manufacturers however offer to shut off the front airbag in the manufacturer's workshop. The kiddy nest is not suited for seats that are equipped with active front airbags. After you have consulted the operating handbook for the vehicle, you can install the kiddy nest on the appropriate seat (see 4. - Make sure that the kiddy nest faces backwards on the car seat (please observe the instructions in section 4. Let the tongue plate snap in the belt lock with a clearly audible "click". Check to make sure it is locked by pulling on the belt. Now slide the shoulder belt of the vehicle's own 3-point seatbelt around the back of the kiddy nest's headrest. Some vehicles have so - called retractor locks. This deactivates the automatic unrolling of the vehicle's own seatbelt system, so that the kiddy nest seat can be firmly installed. Securing your baby in the kiddy nest The kiddy nest has integrated shoulder straps with 3 different settings for the height so that your growing baby is always held in an ideal position in the kiddy nest. Please set the straps in accordance with the following illustrations: 5. Tighten the vehicle's own 3 - point seatbelt by pulling hard on the positions showed in fig. O adjust the shoulder straps, pull them from the back of the kiddy nest through the shoulder pads, the cover and through the baby seat. [. . . ] The guarantee period begins on the date of its purchase. The guarantee is limited to children's car seats that were handled appropriately and were returned in a clean and orderly state. - natural wear and damage from excessive use - damage from unsuitable or improper use The guarantee does not cover: Please contact your retailer immediately in the event of a guarantee claim. He will offer you advice on how to proceed. [. . . ]