User manual KINGSTON WI-DRIVE

[. . . ] After selecting ‘FREE, ’ the grey button will change to ‘INSTALL. €™ Select this button to install the Wi-Drive application to your Android device. Once the App has been installed, you may exit the Play Store and proceed to the next section of this guide. Mini-B USB Port – Allows you to copy content to the Wi-Drive and/or charge the device via USB 2. [. . . ] the ‘Photo’ button represents photo/image file types. Wi-Drive will search through all files and folders on the device and display the supported image file types. The musical note button represents music or audio files. Wi-Drive will use this filter to search through all files and folders for supported music file types and display them. Wi-Drive will search through all files and folders on the device and display the supported video file types. The gear button labeled ‘Settings’ allows you to access the Wi-Drive configuration menus. Once you’ve located the file you want to open or stream, simply tap the file name in the list. A04 Kingston Wi-Drive Page 8 of 14 Configuring Wi-Drive Using the Wi-Drive App, you can customize the wireless network settings for Wi-Drive. Select the Wi-Drive App in the application section of your Android device. Open Wi-Drive’s app menu by selecting the Android device menu (icons may vary based on device. Select the settings icon (gear symbol in the app menu bar. Device Name – commonly referred to as an SSID, or Service Set IDentifier, this field allows you to specify a device name (between 1 and 32 characters) that will broadcast in the list of available wireless networks on your Android device. The default name is Wi-Drive as seen in Figure 5. Visibility Status – this gives you the option to hide or unhide the SSID specified in the ‘Device Name’ field. By default, the visibility status is turned ‘ON’. If you wish to turn this feature ‘OFF’, the device name will NOT be broadcasted1 in the list of available wireless networks on your Android device; however, you can still join the Wi-Fi network by entering the device name manually using the menu option, ‘Add Wi-Fi network’. Wi-Fi Channel – this setting allows you to select a specific frequency channel used to communicate with other devices on your wireless network. Security – this option helps prevent unauthorized access to your Wi-Drive wireless network by prompting users for a password. The security protocols supported by Wi-Drive are WEP, WPA, WPA2, and WPA2 Mixed. the default setting is ‘None. €™ • • • WEP (Wired Equivalent Privacy) – User-defined password, must be exactly 13 characters in length WPA or WPA2 (Wi-Fi Protected Access) – User-defined password, must be 8 to 13 characters in length Mixed – Combination of the other security protocols 1 If the visibility status has been turned off, you can still join the Wi-Drive network by entering the SSID manually on your device, as long as you know the ‘Device Name’ (Step A). Please note that a password will be required if the security option is enabled. [. . . ] A04 Kingston Wi-Drive Page 13 of 14 Safety Guidelines 請依以下方式使用，不當的使用可能會導致電池性能降低或是損害到你的裝置 Please read the following carefully before using the Wi-Drive Product. Incorrect use of your device may result in reduced battery performance, undesired operation, or damage to your device. È«‹å‹¿å˜—試拆解產品 Do not attempt to open or disassemble this product. È«‹å‹¿å°‡æ¶²æ…‹ç‰©æŽ¥è§¸æ­¤ç”¢å“ Do not allow this product to have contact with liquid(s). [. . . ]