User manual KLIPSCH AUDIOROCK

[. . . ] · Do not puncture the battery · Do not directly solder the battery. · Do not use the battery if it shows signs of leakage, a change of color or shape or any other changes in appearance. · Do not wet the battery or place it in water or sea water. This may lead to the battery generating heat or rusting. [. . . ] They can provide "green" lighting and outstanding sound throughout your home. The LightSpeakers are available from your retailer or at www. Klipsch. com. The entire system provides even greater flexibility to you as the owner; because you can take it with you if you move. If you do need to remove it, it leaves no trace that the system was ever installed or used. What's in the box 7 AudioRock Manual v2. indd 7 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH What's in this Box Wireless AudioRock Owner's Manual One Charger One Rechargeable Lithium-ion Battery NOTE: The AudioRock can only be used with the Klipsch Speakers wireless LightSpeaker transmitter. It cannot be used or operated without the LightSpeaker transmitter. Remote and transmitter sold separately. 8 AudioRock Manual v2. indd 8 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Installation Considerations Remember the outdoor line-of-sight range of the system is up to 125 feet, so as long as the distance from the transmitter to the farthest AudioRock, in any direction, is less than 125 feet, the placement of the transmitter is up to you. Selecting AudioRockTM Locations Your wireless AudioRock can be placed anywhere it is convenient in your outdoor listening areas. You can even space multiple AudioRocks so that no one speaker is further than 35 feet from the other speaker. This will provide for the best and most even coverage for you to enjoy outstanding sound quality. 9 AudioRock Manual v2. indd 9 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Setting Up Zones If you have more than one AudioRock and you want to set up separate listening zones in your outdoor area, you have the option of setting up a second zone. An audio zone is any area or group of areas where you want the same audio source playing and want the volume of the speakers to be about the same. If you want an area to have different volume level or play a different set of music then use the two zone option. Please note that there is no right or wrong way to do this, it is simply how you think you want to use your AudioRock system. If you try an option and don't like it, it is easy to change and try another one. NOTE: You have some control over an area being on or off by using the power switch that is on the rear of the AudioRock. Simply turn it off and there will not be any sound in that area. 10 AudioRock Manual v2. indd 10 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Preparing AudioRockTM for Installation Please charge your battery for your rock by plugging in the power supply and inserting the battery into the charger. Allow at least 8 hours for the first charge. NOTE: Leaving the battery in the charger for periods longer than 24 hours may reduce battery life. When an uncharged battery is placed in the charger the LED on the front of the charger will shine RED; when charging is complete the LED will turn green. Charging the AudioRockTM Battery Step 1: Plug adapter into the charger. Step 2: Plug adapter into AC socket Step 3: Slide battery into the charger making sure that it is inserted correctly and that you do not have to force the battery into the charger. Step 4: When the battery is fully charged the LED on the front of the charger will turn green. Step 5: Remove Battery from charger and place it into the AudioRock. 11 AudioRock Manual v2. indd 11 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Installation Instruction Step 1: After the battery has been charged, install it into the battery compartment. Be sure it is pushed all the way in. 1 Zone Volume Pairing 2 Step 2: Be sure the zone switch on the back of your AudioRock is set to zone 1 unless you are setting up a two z one system. If you intend to set up a two zone system be certain the zone switch is set the number corresponding to the zone you intend to place it. 12 AudioRock Manual v2. indd 12 5/31/2010 10:46:21 PM Tech Support: 1-800-KLIPSCH Pairing the AudioRockTM to the Transmitter Before you can begin using and enjoying your new portable wireless AudioRock system it is necessary to "teach" your AudioRock the identity of the transmitter you are using; this teaching is called "pairing" and is very easy to do. [. . . ] We're waiting to hear from you! 1-800-KLIPSCH Email us! If you prefer, your questions and comments can be submitted by email, too; you can count on rapid response and clear, concise answers. support@klipsch. com WRITE THE PART NUMBER AND SERIAL NUMBER FROM YOUR PRODUCT BOX HERE AND RETAIN FOR PRODUCT REGISTRATION Part Number:______________________________________________ Serial Number:_____________________________________________ Register your product online at www. klipsch. com/register. 18 AudioRock Manual v2. indd 18 5/31/2010 10:46:22 PM Tech Support: 1-800-KLIPSCH THIS DEVICE COMPLIES WITH FCC RULES PART 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) This device must accept any interference received including that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]