User manual KLIPSCH PRO CINEMA

[. . . ] 24 Klipsch Professio nal Theater Speaker Systems Installation Manual Applicable for the Installation and assembly of the following products: Screen Systems KPT-MCM Grand KPT-Jubilee® Stage System KPT-941-T (THX® ­ Approved) KPT-941 KPT-535 KPT-904 KPT-325 Surround Systems KPT-250 KPT-200 (THX® ­ Approved) KPT-100 (THX® ­ Approved) KPT-110 SU B W O O F E R S KPT-684 (THX® ­ Approved) KPT-484 Welcome to the Klipsch line of Professional Theater Speaker Systems!Since the earliest days of amplified sound systems, Klipsch has utilized the latest concepts in loudspeaker design, surpassing the expectations of concurrent fidelity. Today, by combining our design excellence with a solid tradition of sonic reproduction quality, Klipsch provides a comprehensive family of professional theater speakers, ranging from compact systems perfect for small auditoriums, mixing suites and viewing rooms, to large four-way horn-loaded systems applicable for installation in the largest cinema venues. In Klipsch designs, you will find technical updates on traditional high quality cinema sound systems, taking into consideration the digital sound sources of today. [. . . ] 13 lines up with the holes in the KPT-904/940-LF. Adjust the horizontal angle as desired and tighten the screws. Locate the two 1/4" -20 on the KPT-Grand-HF. Place the KPT-Grand-HF on top of the KPT-402-MF and align the holes. Reinstall the screws and washers and tighten screws as shown at "C" on Fig. Locate the 1/4" -20 nuts as shown at "D" in Fig. To adjust the vertical angle, loosen the nuts and adjust the horns until the desired vertical angle is achieved. 15 Mechanical Installation Drawings for KPT-325 Please refer to the following drawings for assembly details: Figures 15 and 16. After unpacking all the components, locate the two 1/4" -20 screws on top of the KPT-315-LF. Place the KPT904-HF unit on top of the KPT-315-LF, making sure that the hole/slot as indicated by "A" in Fig. 15 lines up with the holes in the KPT-315-LF. Adjust the horizontal angle as desired and tighten the screws. Locate the 1/4" -20 bolts/nuts on both sides of the bracket as shown at "B" in Fig. To adjust the vertical angle, loosen the bolts and nuts and adjust the horn until the desired vertical angle is achieved. 9 Mechanical Installation Drawings for KPT-941 Please refer to the following drawings for assembly details: Figures 9 and 10. After unpacking all components, locate the KPT-941 HF compression driver and horn. Attach the driver to the horn using supplied hardware. Locate the two 1/4" -20 screws on top of the KPT-904/940-LF. Place the KPT-941-HF unit on top of the KPT-904/940-LF, making sure that the hole/slot as indicated by "A" in Fig. 9 lines up with the holes in the KPT904/940-LF. Adjust the horizontal angle as desired and tighten the screws. Locate the 1/4" -20 nuts as shown at "C" in Fig. [. . . ] After unpacking all components, locate the KPT-941 HF compression driver and horn. Attach the driver to the horn using supplied hardware. Locate the two 1/4"-20 screws on top of the KPT-XII. Place the KPT-941-HF unit on top of the KPT-XII, making sure that the hole/slot as indicated by "B" in Fig. [. . . ]