User manual KLIPSCH PROMEDIA DD-5.1

[. . . ] ProMediaTM DD-5. 1 Multimedia Digital Decoder Preamplifer R Acknowledgement & Trademark Acknowledgment & Trademark All contents are subject to change at any time without notice. No responsibility is assumed for its use; or for infringements of patents or other rights of third parties and no patent or license is implied hereby. All trademarks are the property of their respective owners. Manufactured under license from Dolby Laboratories. [. . . ] Do l by Digital Co SURROUND Playing DVD title with DTS format, the display shows the following information. DTS COAX I AL SURROUND Playing DVD, CD, LD, VCR and Games with analog outputs connected to the analog inputs (LINE, AUX1 & AUX2) of DD-5. 1, the display shows the following information. PCM L INE I N STEREO DD-5. 1 Operation ­ Mode Selection Surround Processing Modes: The versatile Audio Station DD-5. 1 surround sound processor is capable of processing both the digital/analog audio signals from today's A/V equipments, with all equipments connected properly, DD-5. 1 will automatically detects the type of digital signal present at the appointed digital input. 14 DD-5. 1 Operation ­ Input Selection Input Selection The DD-5. 1 can be connected up to 5 audio sources. Select the input source feeding to DD-5. 1 by delay prologic power mute balance repeatedly pressing the INPUT Button on the remote control until the desire setting is reached. field EQ on/off EQ setup preset 1 preset 2 preset 3 In the Digital Mode (Dolby Digital / DTS), end user can manually select the audio input source either in coaxial or optical form depending on the type of the output source. If "COAXIAL" is selected, display of DD-5. 1 shows the following information: Do lby DigitaI Co SURROUND If "Optical" is selected, display of DD-5. 1 shows the following information: Do lby DigitaI Op SURROUND In the PCM mode, you can select among 3 sets of audio input sources such as CD Player, VCR, game consoles etc. Display of DD-5. 1 shows the following information: PCM STEREO PCM STEREO PCM STEREO L I NE IN AUX1 AUX2 15 DD-5. 1 Operation ­ Test Mode Test Mode After completing the connection, press the TEST Button on the remote to see if the system functions properly. You can also use the test mode to test the power location of the speakers. When TEST Button is pressed, white noise is generated thru all satellite speakers in an order of L, C, R, SL, and SR channels for 2 seconds each. When completed, the DD-5. 1 returns to Auto Decode mode. mute balance delay prologic field EQ on/off EQ setup preset 1 preset 2 preset 3 When test mode is running, the display shows information in a sequence as below: Dolby DigitaI TEST L Dolby DigitaI TEST C Dolby DigitaI TEST R Dolby DigitaI TEST SL Dolby DigitaI TEST SR CO CO CO CO CO 16 DD-5. 1 Operation ­ Mute Mode Mute Mode Pressing MUTE Button on the remote control power can interrupt all signal outputs (including the G9 and 6 RCA connectors. ) To disable the mute function, press MUTE Button again. mute balance delay prologic field EQ on/off EQ setup preset 1 preset 2 preset 3 When MUTE Button is pressed, display shows the following information: Dolby DigitaI Co SURROUND MUT E DD-5. 1 Operation ­ Master Volume Control Volume Setting Cen SL/SR VOL DRC SW D Time To increase or decrease the master volume of DD-5. 1, simply press VOL + or VOL - on the remote control. Example: Volume being decreased by 3 decibels. Do lby DigitaI Co VOLUME - 03dB 17 DD-5. 1 Operation ­ Balance Setting Balance Balance button balance delay prologic field EQ on/off EQ setup preset 1 preset 2 preset 3 Users can customize the volume setting of each individual channel. To select a channel, press BALANCE Button on the remote control. Press this button repeatedly until desired channel is reached. Adjust volume on selected channel by pressing VOL + or VOL - on the remote control. save preset 4 load Cen SL/SR VOL SW D Time DRC Example: Press BALANCE Button will display the current balance volume for channel L. Do lby DigitaI BALANCE L 0 Press BALANCE Button again will circle to next channel. Do lby DigitaI BALANCE R 0 Co dB Co dB Press VOL + or VOL - will increase or decrease the balance volume for selected channel. Do lby DigitaI Co BALANCE R +01dB 18 DD-5. 1 Operation ­ Delay Calibration C L TV SW R SL SR The ideal listening position is defined as below: l Center channel speaker should be placed in a position that has an equal distance as the left and right speakers to listener. l Surround left and surround right speakers should be placed on the backside of listener and above listener's ear level. l If speaker placement is restricted due to the physical environment of the room, delay calibration is sometimes necessary to achieve the ideal listening environment. l In case center speaker only can be placed in a position that has a closer distance to listener than that of left and right speakers. The sound from the center speaker might arrive to the listener before the left and right speakers. The difference in sound arrival time would ruin the sound quality and effect, even the best DVD titles. Fortunately DD-5. 1 allows you to adjust the center speaker time delay to compensate this problem by increasing the delay time for the center channel. [. . . ] Dolby DigitaI BALANCE L 0 Press BALANCE Button again will circle to next channel. Dolby DigitaI BALANCE R 0 Co dB Co dB Press VOL + or VOL - will increase or decrease the balance volume for selected channel. Dolby DigitaI Co BALANCE R - 01dB 32 Warranty U. S. AND CANADA KLIPSCH, LLC ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of one (1) year from the date of purchase. [. . . ]