User manual KLIPSCH PROMEDIA ULTRA 5.

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled, objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. [. . . ] Connect the speakers by inserting the tinned wire leads into the subwoofer and the back of the satellites. The solid black wire (-) connects to the black spring clips; the black wire with white dashes (+) to the red spring clips. Do not plug in the AC power until your computer/audio system is set up. Plug headphone mini stereo plug in headphone jack, if desired. Plug stereo mini plug into MP3/Aux jack. Plug stereo mini plug into MP3 player (for example). 1 6 3 (iPod) 2 (CD Player) 4 5 WARNING WARNING: Do Not Open!Voltages in this equipment are hazardous to life. Refer all servicing to qualified service personnel. Since the ProMedia 2. 1 has its own internal amplifier, it was designed to hook into the line out connector. Connection to the speaker level output jack might result in poor sound quality. WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back panel or included power supply of the product. Operation from voltages other than those indicated may cause irreversible damage to the product and void the product's warranty. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CONTROL POD FEATURES Headphones: The 1/8" stereo headphone output jack, located on the right-hand side of the control pod, turns off the two satellite speakers and the subwoofer output. The main volume control will adjust the headphone output. MP3/Aux: The MP3/Auxiliary input jack is used with portable audio players. This signal will be mixed with the main source. The input has a +6dB input sensitivity to help compensate for the lower output voltage of some portable players. To obtain the proper balance with the main signal, the level adjustments in the computer software and in the portable player will need to be adjusted. An example would be listening to an MP3 player while surfing the net and hearing associated sounds from various websites. The mixed sound may not be desirable, and you will ultimately determine how you use this feature. NOTE: During playback of MP3s, overall sound quality may be perceptibly degraded compared to other audio sources such as CD. This is caused by the encoding method and quality of the MP3 file. It is recommended that MP3 files be encoded at a minimum 128 bit rate. SPECIFICATIONS (Visit www. klipsch. com for more details) Satellite Impedance: Preamplifier Control Pod: Satellite: Subwoofer: Amplifier: Subwoofer Limiter: 4 ohms minimum Subwoofer and Main volume level controls LED power indicator MP3/Aux player line input with soundcard mixing function Headphone jack Direct path interface Sealed elliptical two-way enclosure with 25mm metalized polymer dome tweeter mated to MicroTractrixTM Horn and 3" long-throw mid-bass driver Bass-reflex enclosure with rear port and front-firing 8" long-throw driver; slot tuned port; sixth-order enclosure design High-efficiency Class D power section and audio quality transformer designed for uncompressed full power sound Protective limiter function protects the driver and amplifier from extremely high volume playback ACCESSORIES All accessories are available at www. klipsch. com. [. . . ] The receipt must reflect that you are the original purchaser, the product was bought from an authorized Klipsch retailer, and the product is still within warranty. You will be issued a return authorization number (RA#) and asked to ship the defective product, together with proof of purchase and RA#, prepaid insured to the address set forth Klipsch 137 Heampstead #278 Hope, AR 71801. Freight collect shipments will be refused. Risk of loss or damage in transit is to be borne by the purchaser. [. . . ]