User manual KLIPSCH SCW-2

[. . . ] "Dolby", "ProLogic " and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater Systems, Inc. 5, 451, 942, 5, 956, 674, 5, 974, 380, 5, 978, 762 and other world-wide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. [. . . ] Gradually turn the volume up to an appropriate level after the playback has started. 11 DD-5. 1 Remote Control 6 96 power 7 1 3 5 2 mute 4 7 balance delay prologic 8 9 10 11 12 field EQ on/off EQ setup 10 8 preset 1 preset 2 preset 3 11 save preset 4 load 12 Cen 13 14 SL/SR VOL DRC SW D Time 15 18 19 17 16 13 14 1 POWER Button On/off key 2 INPUT MODE Button Select among 5 different source inputs 3 TEST Button Test the signal for 6 discrete channels 4 MUTE Button . Interrupt the signal from reaching the output 5 PROLOGIC Button Select up to 4 different surround settings 15 16 17 18 19 DELAY Button Select the desired channel to engage the time delay adjustment. DD-5. 1 will reset to factory default if the adaptor is plugged back to AC outlet. 13 DD-5. 1 Operation ­ LCD Display Auto Decode Mode (Auto detect input stream type) When DD-5. 1 is turned on, it automatically detects and differentiates the audio signal coming from source unit. Playing DVD title with Dolby Digital (AC3) format, the display shows the following information. Do l by Digital Co SURROUND Playing DVD title with DTS format, the display shows the following information. DTS COAX I AL SURROUND Playing DVD, CD, LD, VCR and Games with analog outputs connected to the analog inputs (LINE, AUX1 & AUX2) of DD-5. 1, the display shows the following information. PCM L INE I N STEREO DD-5. 1 Operation ­ Mode Selection Surround Processing Modes: The versatile Audio Station DD-5. 1 surround sound processor is capable of processing both the digital/analog audio signals from today's A/V equipments, with all equipments connected properly, DD-5. 1 will automatically detects the type of digital signal present at the appointed digital input. 14 DD-5. 1 Operation ­ Input Selection Input Selection The DD-5. 1 can be connected up to 5 audio sources. Select the input source feeding to DD-5. 1 by delay prologic power mute balance repeatedly pressing the INPUT Button on the remote control until the desire setting is reached. field EQ on/off EQ setup preset 1 preset 2 preset 3 In the Digital Mode (Dolby Digital / DTS), end user can manually select the audio input source either in coaxial or optical form depending on the type of the output source. If "COAXIAL" is selected, display of DD-5. 1 shows the following information: Do lby DigitaI Co SURROUND If "Optical" is selected, display of DD-5. 1 shows the following information: Do lby DigitaI Op SURROUND In the PCM mode, you can select among 3 sets of audio input sources such as CD Player, VCR, game consoles etc. Display of DD-5. 1 shows the following information: PCM STEREO PCM STEREO PCM STEREO L I NE IN AUX1 AUX2 15 DD-5. 1 Operation ­ Test Mode Test Mode After completing the connection, press the TEST Button on the remote to see if the system functions properly. You can also use the test mode to test the power location of the speakers. Do lby DELAY DigitaI Co SL 5 ms Press the DELAY Button again will circle to next channel. Do lby D E L AY DigitaI Co SR 5 ms Press the D TIME + or D TIME - button will increase or decrease the delay time for current channel. Do lby DE L A Y DigitaI Co SR 6 ms 20 DD-5. 1 Operation ­ Time Delay Adjustment on Surround Speakers Delay Calibration balance delay prologic field EQ on/off EQ setup preset 1 preset 2 preset 3 Press DELAY Button to select the length of delay time for SL/SR/C channels. Repeatedly pressing DELAY Button will allow you to select among 3 surround speakers (SL, SR, C. ) The delay time range for SL/SR is 0 to 15 ms and 0 to 5 ms for center. Adjust delay time on selected channel by pressing D TIME + or D TIME - on the remote control. save preset 4 load Cen SL/SR VOL SW D Time DRC Surround Speaker Delay Delay calibration for the surround speaker is necessary when the surround speakers are placed quite close to the listener. The type of placement would probably ruin the sound quality of your movie. To correct this problem, press DELAY Button repeatedly until SL/SR appear on the display. Increase the time delay of the surround speakers by pressing D TIME + until you are able to hear a 3D sound effect coming from surround speakers. Press DELAY Button again will circle to next channel. Do lby DELAY Do lby D E L AY DigitaI Co SL 5 ms DigitaI Co SR 5 ms Press D TIME + or D TIME - will increase or decrease the delay time for current channel. Do lby DE L A Y DigitaI Co SR 6 ms 21 DD-5. 1 Operation ­ Pro Logic Mode Pro Logic Mode power mute balance delay prologic field EQ on/off EQ setup preset 1 preset 2 preset 3 Your DD-5. 1 will automatically switch to Pro logic mode when it detects the Pro logic signal. [. . . ] To select a channel, press BALANCE Button on the remote control. Press this button repeatedly until desired channel is reached. Adjust volume on selected channel by pressing VOL + or VOL - on the remote control, exempt from the condition during 0 dB ( max level ). As to perform wished setting, it is suggested to adjust the waster volume, wile the center remain 0 dB, and to decrease the individual channels as wished. field EQ on/off EQ setup preset 1 preset 2 preset 3 save preset 4 load Cen SL/SR VOL SW D Time DRC Example: Press BALANCE Button will display the current balance volume for channel L. [. . . ]