User manual KOBIAN CYPERPIX E560M

[. . . ] Cover User Manual This manual can guide you to use this camera with proper operation and correct setting. Please read it carefully and optimize the performance in accordance with your preference. Table Of Contents Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 Overall Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 External View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Mode Dial (Working Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07 Focus Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07 Icon Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Icon Index Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Table Of Contents Formatting the Built-in Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note With a built-in flash memory, the image(s) can be stored either in it or in memory card. Only if the memory card is inserted, the images will be stored in the memory card rather than the built-in flash memory. On the other hand, the images will be stored in the built-in flash memory only if a memory card is not inserted. Getting Started Basic Photography 1. Set the Mode Dial at Shooting Mode ( ) for still image or Movie Clip Mode ( ) for video recording. The setting of the focus range for still image capture is required as follows Macro ( ) : 0. 2m Normal ( ) : 0. 8m~infinity 5. Refer to the next section -- Advanced Functionality Settings (page14) to set up the features you prefer. Hold still and press down the Shutter Button. Night Scene Fill-in Flash Flash Off The flash will flash and the exposure time is set to 1/4 second so that the subject in the foreground and the background are properly exposed. The mode will enable the flash to fire in any circumstances. The mode will disable the flash to fire in any circumstances. 14 15 Advanced Functionality Settings Setting Image Size (Preset: 2048 x 1536) Advanced Functionality Settings Setting Image Quality (Preset: Fine Quality) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Note Four resolutions provided can be selected as follows: ( ) 2560 x 1920 (XL) ( ) 2048 x 1536 (L) ( ) 1600 x 1200 (M) ( ) 1280 x 960 (S) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Note Three levels of image quality can be selected as follows: ( ) Super Fine ( ) Fine ( ) Normal Note The better the image quality is set, the less the number of images can be stored in the built-in flash memory or the memory card. Note You can easily check whether the setting is changed or not by the resolution icon display on the right side of the LCD screen. If not, please repeat the above steps. 16 17 Advanced Functionality Settings Setting Voice Memo (Preset: 10 SEC) Advanced Functionality Settings Setting Exposure (Preset: ) Step 1 : To enter the setting mode Step 2 : To select and confirm the Option Step 3 : To select and enter the option Step 4 : To escape the setting Note With the Voice Memo, you can view the icon ( Monitor. Note With the Voice Memo, the audio is stored in WAV file format. So you can download both of the image in JPG and the Voice Memo in WAV on PC. ) on the TFT LCD Step 1 : To enter the setting mode Step 2 : To select and confirm the Option Step 3 : To select and enter the option Step 4 : To escape the setting Note The higher the value is, the brighter the image will be. 18 19 Advanced Functionality Settings Setting White Balance (Preset: Auto) Advanced Functionality Settings Under Playback Mode ( Exploring an Image ) Step 1 : To enter the setting mode Step 2 : To select and confirm the Option Step 3 : To select and enter the option Step 4 : To escape the setting Note Five White Balance modes can be selected as follows: Auto Adjusting the white balance automatically Daylight Sunset Fluorescent Tungsten Note It is suggested to stay AUTO mode for beginners. 20 Step 1 : To enter the setting mode Step 2 : To explore the image Step 3 : To zoom in/out and enter the option Step 4 : To escape the setting Under strong light environment Under sunset light environment Under fluorescent light environment Under tungsten light environment 21 Advanced Functionality Settings Displaying an Image Information Advanced Functionality Settings Thumbnail Images (Small Images) Display Playback of a Movie Clip Note Press Up ( ) and Down ( ) Direction Button to search for the images or movie clips and press Right ( ) Direction Button to see the movie clip. Note The appearance of icon of ( ) represents a movie clip, not a still image. Note Press Up ( ) and Down ( ) Direction Button to search for the movie clip you record and press Right ( ) Direction Button to see the movie clip. Note The appearance of icon of ( ) represents a still image with voice memo. 22 23 Advanced Functionality Settings Deleting Image(s) Advanced Functionality Settings Formatting the Built-in Flash Memory Please make sure no memory card is inserted. Refer to page 24 and follow the steps, selecting "FORMAT" in step 3 , "YES" in step 4. Setting Slide Show (preset: 1 SEC) Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and enter the option Step 4 : To select and confirm the option Step 5 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Formatting an SD Card Please inset an SD Card in advance. Follow the above steps, selecting "FORMAT" in step 3, "YES" in step 4. 24 25 Advanced Functionality Settings Setting Image Protection Advanced Functionality Settings Printing Out Images without a PC(Preset : X0) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To select and enter the option Step 4 : To escape the setting Note After the above steps are done, please check if the ( ) is shown on the right side of the TFT LCD screen. If it is not shown please repeat the above steps. For canceling this "PROTECT" function, please repeat the steps above and select "UNLOCK" in the step 3 instead. Note After the above steps are done, please check if the ( ) is shown on the left down corner. If it is not shown, please repeat the steps. You cannot see the "PRINT" function on the TFT LCD Monitor if a memory card is not inserted. 26 27 Advanced Functionality Settings Under Movie Clip Mode ( ) (Preset :10 SEC) Setting the Recording Time of a Movie Clip Advanced Functionality Settings Under Setup Mode ( ) Setting Beep Sound (Preset : On) Step 1 : To enter the setting mode Step 2 : To select and confirm the option Step 3 : To escape the setting Step 1 : To enter the setting mode Step 2 : To select and enter the option Step 3 : To select and confirm the option Step 4 : To escape the setting Setting Auto Power Off (Preset : 2 Minutes) Note 1. [. . . ] Copy an image for pasting onto your desired image editor. Rotate, flip and edit images, and then save the changes. Create wallpapers and screen savers using your images. PC Connection U s in g t he Ul ead P hoto Exp lor er Viewer : Photo Explorer's built-in PC Connection 51 A standalone image viewer, the Ulead Instant Viewer, also comes with Photo Explorer. It is a simpler, independent applic ation and its sole purpose is only for displaying images. [. . . ]