User manual KOBIAN CYPERPIX E660P

[. . . ] FCC STATEMENT (For customers in USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The image is captured about 10 seconds after the shutter is pressed. This mode is suitable for the shots in which the photographer has to be included. 10+2 sec. Self-timer The first image is captured about 10 seconds after the shutter release button is pressed, and then the second image is captured 2 seconds later. This mode is convenient when capturing group images in succession. Flash does not fire in this mode. After one shot is taken, the self-timer mode is turned off. If you wish to take another image using the self-timer, repeat these steps. EN-33 Adjusting the Exposure (EV Compensation) You can manually adjust the exposure determined by the digital camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas) between the subject and the background is extremely high. The EV compensation value can be set from -2. 0EV to +2. 0EV. Press the power switch to turn on the power. Press the four-way controller ( / ) and use to set the range of EV compensation value from -2. 0EV to +2. 0EV. Press the button to confirm the setting. Select : EV ±0. 0 0. 0 Set : EN-34 Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. Press the power switch to turn on the power. Use the four-way controller ( ) to select [W. Use the four-way controller ( ) to select the desired white balance setting, then press the button to confirm. To cancel the setting, press the button and exit the menu. Mode1 Mode2 Mode3 Image Size Im ge Si Quality W. Balanc ISO Return : eturn Retu n Select : W. Balanc Auto uto Aut Daylight Cloudy Tungste Tungsten ungsten Cancel : Select : W. Balance Fluo escent Fluorescent luorescen Cancel : Select : EN-35 USING THE MODE DIAL Auto Mode [ ] (Auto) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. The camera sets the optimal focusing and exposure. Rotate the mode dial to and turn your camera on by pressing the power switch. Compose your subject within the focus frame. Press the shutter release button down halfway to focus the image. [. . . ] 1. 8 m (at the standard output sensitivity of 200) 2. 4" color TFT-LCD Approx. 110K pixels display Flash effective range LCD monitor EN-74 Item Self-timer White balance ISO Interface Power Dimension Weight * Description 10 sec self-timer, 2 sec self-timer, 10+2 sec self-timer Auto, Daylight, Cloudy, Tungsten, Fluorescent Auto, 64, 100, 200 DC input terminal, PC/AV terminal 2 x AA (alkaline or Ni-MH rechargeable) batteries AC-DC Adapter (3V/2. 5A) (Optional) Approx. 130g (without batteries & SD card) Exposure compensation -2. 0EV~ +2. 0EV (in 1/3 EV increments) Recording capacity shows approximate number of shots recorded during CIPA-compliant testing. Actual performance may vary according to operating conditions. [. . . ]