User manual KOBIAN CYPERPIX E685P

[. . . ] User's Manual >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] button SET button Stop (The display returns to the 1st frame playback) Pause Canceling pause - During a Pause During a Stop - The next image is displayed. - The pervious image is displayed. Regular forward play Video clips cannot be displayed rotated or enlarged. The playback information will not be displayed on the LCD monitor with video clips. EN-39 adapter terminal of the camera first, and then connect one end of the A/V cable to the A/V terminal of the conversion adapter. Connect the other end to the A/V input socket of the TV set. Play back the still images / video clips. The method of operation is the same as playing back still images and video clips on the camera. Refer to section in this manual titled "Video Output" in the Setup Menu (In Playback Mode) for further details. 40-EN A\V OUT Digital Camera >> Playing Back Still Images/Video Clips on a TV You can also playback your images on a TV screen. Before connecting to any devices, make sure to select NTSC / PAL system to match the video output system of the video equipment you are going to connect to the camera, then turn all connected devices off. It is also recommended to use the AC power adapter/charger while transferring the recorded images and video files. Connect one end of the A/V cable to the conversion adapter terminal of the camera. If you use the conversion adapter to connect the A/V cable, insert the conversion adapter into the conversion User's Manual >> Attaching Voice Memos A maximum of 30 seconds of audio can be recorded like a memo for photographed still images. The voice memo can be recorded only once. Slide the mode switch to [ The last image appears on the screen. Select the image that you want to attach the voice memo with the / buttons. [VOICE RECORDING] is displayed on the screen and recording starts. To stop recording voice memo during recording, press the shutter button again. [VOICE RECORD END] will be displayed and the recording will end. A [ ] icon is displayed with images that have been recorded with a voice memo. Playing back voice memo A press of the SET button displays [VOICE PLAYBACK] and plays back the voice memo. Voice memo is only available for still images. EN-41 Digital Camera >> 42-EN Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can quickly search for the image that you want. Slide the mode switch to [ The last image appears on the screen. Press the The images are displayed in the thumbnail display. Images that have been selected with / / / buttons will be indicated the by a green frame. When there are ten or more images, scroll the screen with the / buttons. / / / buttons to select the image to be displayed at 3. The selected image is displayed at its regular size. A[ ], [ ], [ ] icon will be displayed in a thumbnail display. User's Manual >> Zoom Playback This mode also allows you to enlarge your image on the selected portion of the image to check for small details. [. . . ] range. Symptom The flash does not fire. Even though the flash fired, the image is dark. Cause The flash is set to flash off. Solution Set the flash to something other than flash off mode. User's Manual >> The distance to the subject Get closer to your subject i s g r e a t e r t h a n f l a s h and shoot. effective range. The image was captured in Set the flash to something a dark place while set to other than flash off mode. Set the exposure compensation It is under-exposed. [. . . ]