User manual KODAK DC220

[. . . ] KODAK DIGITAL SCIENCEª DC220 and DC260 Zoom Cameras UserÕs Guide for the cameras, KODAK Installation Software, KODAK Camera Properties Software, KODAK Mounter Software, and KODAK Acquire/TWAIN Software Visit Kodak on the World Wide Web at www. kodak. com Kodak, Digital Science, FlashPix, and the ds monogram are trademarks of Eastman Kodak Company. Digita is a trademark of FlashPoint Technology, Incorporated. The FlashPix format is defined in a specification and test suite developed and published by Kodak in collaboration with Microsoft, Hewlett-Packard, and Live Picture. Only products that meet the specification and pass the test suite may use the FlashPix name and logo. Table of Contents Page 1 Getting started . [. . . ] Battery Power Off After turns the camera off after a period of inactivity when using battery power. Quick View Display Off After defines how long a newly captured picture is displayed before the LCD turns off. 5-3 Specifying Camera settings 1 Click the CAMERA SETTINGS tab. 2 Specify the settings. Refer to the following subsections for a brief description of each setting. 3 To apply these settings to the camera, click the APPLY button. Picture type--Choose the type of picture--Still , Burst , or Timelapse --that you want to take. This field defaults to Still when you turn the camera off. You can also set this setting through the Capture mode settings on the camera. White Balance--White Balance examines your pictures and tries to adjust the color balance to remove the color casts that the current lighting conditions add. Use Automatic when taking pictures under a variety of lighting conditions. Use Daylight when taking pictures outdoors. Use Fluorescent when taking pictures under fluorescent light. Use Tungsten when taking pictures under normal incandescent light. You can also set this setting through the Capture mode settings on the camera. Flash mode--The mode in which you want the camera's flash to operate. Auto causes the flash to fire only when there is not enough light. Fill causes the flash to fire for every picture. Red-eye Reduction causes the flash to fire twice--once 600 milliseconds before the picture is taken to constrict the subject's pupils, and once when the picture is taken. You can also set this setting through the Capture mode settings and through the SCROLL and SELECT buttons on the camera. Focus (DC260 only)--Single spot determines the focus position using the subject in the center of the lens. Multi-spot determines the focus position using three positions on the lens. Manual allows you to specify the focus position from the pull down menus. You can also set this setting through the Capture mode settings on the camera. Macro (DC220 only)--On disables the zoom control and places the lens in 5-4 the macro position. Off enables the zoom control and sets the lens position to 28mm. You can also set this setting through the SCROLL and SELECT buttons on the camera. [. . . ] THIS WARRANTY DOES NOT COVER: CIRCUMSTANCES BEYOND KODAK'S CONTROL; SERVICE OR PARTS TO CORRECT PROBLEMS RESULTING FROM THE USE OF ATTACHMENTS, ACCESSORIES OR ALTERATIONS NOT MARKETED BY KODAK; SERVICE REQUIRED AS THE RESULT OF UNAUTHORIZED MODIFICATIONS OR SERVICE; MISUSE, ABUSE; FAILURE TO FOLLOW KODAK'S OPERATING, MAINTENANCE OR REPACKAGING INSTRUCTIONS; OR FAILURE TO USE ITEMS SUPPLIED BY KODAK (SUCH AS ADAPTERS AND CABLES). KODAK MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED, OR OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE FOR THIS EQUIPMENT OR SOFTWARE. REPAIR OR REPLACEMENT WITHOUT CHARGE ARE KODAK'S ONLY OBLIGATION UNDER THIS WARRANTY. KODAK WILL NOT BE RESPONSIBLE FOR ANY SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE PURCHASE, USE, OR IMPROPER FUNCTIONING OF THIS EQUIPMENT REGARDLESS OF THE CAUSE. [. . . ]