User manual KODAK DC25

[. . . ] KODAK DC25 Digital Camera UserÕs Guide for camera and software Adobe Photoshop is a trademark of Adobe Systems Incorporated or its subsidiaries and may be registered in certain jurisdictions. PictureWorks is a trademark of PictureWorks Technology, Inc. KaiÕs Power Goo is a trademark of MetaTools, Inc. Table of Contents Page Table of Contents Table of Contents . . 2-15 i Using DC25 with Your Computer . [. . . ] Check the status and make the appropriate changes. This is not recommended if the device appears to function properly. If your computer still does not recognize that the DC25 is attached and turned on, you may need to adjust the serial port and speed settings. 1 Open PhotoEnhancer Software. 2 From the Camera pulldown menu select Set Camera Communications. 3 Select DC25 from the Camera Type field. 4 From the Camera Port field select COM 1 or the port you have connected the camera to. 5 Adjust Camera Port Speed up or down by one setting. 7 Open the PhotoEnhancer Express menu and select Photo Center. 8 Select Preview pictures from DC20/DC25. 9 If the software does not recognize the DC25, continue to adjust the serial port speed on COM1, and the other COM ports until the DC25 is recognized. Once your computer can communicate with your camera, gradually increase speed to optimize transfer picture time. 3-2 Printing You may notice that the colors on your computer screen do not always match those in your documents or prints. This is because monitors and printers use different color systems. Tips You may be able to achieve more predictable results in your printed documents by: improving the quality of your paper. Copier paper may not offer the same results as coated paper or paper made especially for ink jet printers. adjusting your printer software settings. Do not use ink cartridges beyond their life expectancy. If you need extreme precision in matching printed output to your computer screen, you may want to consider purchasing a calibration system. The aim of a calibration system is to match, as close as possible, the printed image to the image on your computer screen. Remember these few tips when it comes time to print your document. the more complex your document is also increases the print and drying time. color printing is more memory intensive than black and white. If your computer gives you an insufficient memory message, you may need to close some applications, change some settings, or add additional memory. color prints may not photocopy as clearly as black and white. If you plan to photocopy documents, you may consider printing the document in gray scale. This setting is usually changed from the print menu. [. . . ] The Enhancement Short Cuts menu appears. 5 PhotoEnhancer 3 Click By Example. The Filter By Example window opens with a reduced version of the original picture in the upper right corner. The blue square controls the part of the picture that appears in the nine sample boxes. Drag the blue square in the reduced version to view the different areas of the picture. The middle sample box corresponds to current picture setting. 5-7 4 Click on the appropriate Picture Enhancement option: Focus to sharpen. [. . . ]