User manual KODAK DP800

[. . . ] "Limited Warranty", "FCC Statement" and "Trademarks Copyright" 1. Limited Warranty Except as otherwise stated herein, warrants to the first end-user who purchases a Projector from a dealer ("Customer") that the Projector is free from defects in parts and labour under normal use during the warranty period. The warranty period means the twelve (12) month period from the date of the Customer's purchase of the Projector from a dealer. During the warranty period, Distributor will, at its option and in its sole discretion, repair or replace defective parts, including replacement of the entire Projector unit, at no additional charge to the Customer. [. . . ] There are 5 pre-defined selections as well as Custom (see below). As an example, say that you want the secondary button to emulate the Enter key. Simply choose the Enter key item in the popup menu and the 25 very useful when doing click-drags in either the Finder or word-processor. To release, press the secondary button again. The On-Line help area: Moving the mouse over different items of the window will activate the on-line help for that item. In figure 1, the mouse is over the controller graphic, and the on-line help is giving you some information pertinent to it (notice that the on-line help for includes the driver version, this way you can easily check if you have the latest driver installed). The control panel on the Projector provides you with direct access to the most important control functions. The control panel on the Projector is very handy to use when the Remote Control has low batteries, or you simply have forgotten to bring it with you. The key functions are as follows: SENSITIVE MOUSE PAD: The sensitive mouse pad works just like the sensitive mouse pad on the Interactive Remote Control, and is used to move the cursor within the Projector menu system. It will also control your computer mouse. MENU Press this key to access the menu and to project the MAIN MENU on the projection screen. Pressing the Menu key again will remove the menu and return the Projectorto normal operation. Using the control panel on the Projector Stand by TV tuner Computer Zoom Comp. Video Vol Enter Menu ENTER The ENTER key is used to select the menu option pointed to by the menu cursor. In a level two window the Enter key is used to execute the function pointed to by the menu cursor. Fig. 12. The keys on the control panel on the Projector Contents 26 VOLUME + The VOLUME + is used to control the sound when the Projector is used together with a video source or a computer with a sound card. Press the VOLUME + to increase the volume. VOLUME ­ The VOLUME ­ is used to control the sound when the Projector is used together with a video source or a computer with a sound card. Press the VOLUME ­ to reduce the volume. ZOOM Press this key to zoom the projected image to the desired size. FOCUS Press this key to focus the projected image. SOURCE The Projector has direct keys for all four sources. TV-TUNER: Press this key if you want to select TV as your source COMPUTER: Press this key if you want to select COMPUTER as your source COMP. VIDEO: Press this key if you want to select Composite Video as your source S. VIDEO: Press this key if you want to select S-Video as your source LEFT AND RIGHT ARROW KEYS These keys are used to change the TV channel when TV is selected as your source. STAND BY This key will put the Projector in to stand by mode. To return to normal mode press the Menu or Enter key. 27 Contents Using the menus Enter the MAIN MENU With the Interactive Remote Control or the Control Panel, press the MENU key to get the MAIN MENU. [. . . ] This means that you cannot find the publicly known name of TV channel you are looking for, but you should use the up and down arrows to scroll the channels. When you get to a channel that you would like to have easy access to you can assign it to the current TV Program (1 - 30) by pressing the assign button. Go through all of the channels and assign up to 30 programs for easy access. Close button: When you are finished adjusting the TV-Tuner settings you press this button to leave the menus. The channel programmed at the currently shown TV Program will be shown on your screen. TV-program menu Select the above icon from the MAIN MENU. [. . . ]