User manual KODAK DP900 REFERENCE MANUAL

[. . . ] Reference Manual KODAK DP900 / DP1100 Digital Projectors with KODAK Image Manager PN 010-0210-00 8/99 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Canada This Class A digital apparatus complies with Canadian ICES-003. [. . . ] Press the right mouse button to lighten the image. Tint The tint adjusts the red-green color balance in the projected image. Changing the Tint setting has no effect on PAL or SECAM video sources. · Press the left mouse button to increase the amount of green in the image. Press the right mouse button to increase the amount of red in the image. · 32 3/99 Using the Projector Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. · · Press the left mouse button to decrease the contrast. Press the right mouse button to increase the contrast, making the blacks appear blacker and the whites appear whiter. Color The color setting adjusts a video image from black and white to fully saturated color. · Press the left mouse button to decrease the amount of color in the image. Press the right mouse button to increase the amount of color in the image. · Blank Screen Blank Screen determines what color is displayed when there is no active source and when the projector is in standby. Click either mouse button to toggle between blue and black. Reset All Click either mouse button to reset all the options (except Language, Video Standard, Ceiling and Rear Projection, and Standby Time) in all the menus to their original settings. This also returns Freeze and Mute to their default (off) settings. 3/99 33 Reference Manual KODAK DP900 / DP1100 Audio Menu Figure 17Audio menu Volume Note: Changing the volume from the menu is the same as changing it using the keypad. · Press the left mouse button to decrease the volume. · Press the right mouse button to increase the volume. Volume adjustments you make are saved for each source. Treble The treble setting controls the high frequencies of your audio source. · · Press the left mouse button to decrease the treble. Press the right mouse button to increase the treble. Treble adjustments are saved for each source you have connected. Bass The bass setting controls the low frequencies of your audio source. · · Press the left mouse button to decrease the bass. Press the right mouse button to increase the bass. Bass adjustments are saved for each source you have connected. 34 3/99 Using the Projector Image Menu Figure 18 Image menu Auto Image Note: Some screen savers interfere with the operation of Auto Image. If you're experiencing problems, try turning your screen saver off, then turning Auto Image off and back on. The projector automatically adjusts tracking, signal synchronization and vertical and horizontal position for most computers (Auto Image does not apply to video sources). If you want to adjust these features manually, you must turn off Auto Image first by highlighting Auto Image in the Image menu and clicking either mouse button to select "off". Auto Resize Auto Resize automatically resizes the image by scaling it up or down. It only affects computer images that are not the projector's native resolution. When Auto Resize is on, the projector makes the best fit of the image to the screen. If you turn Auto Resize off (by highlighting it in the Image menu and clicking either mouse button to select "off"), the image may be either cropped or too small for the screen. 3/99 35 Reference Manual KODAK DP900 / DP1100 Manual Sync The projector adjusts signal synchronization automatically for most computers. But if the projected computer image looks fuzzy or streaked, try turning Auto Image off then back on again. [. . . ] Position 36 3/99 D Default Source 38 dimensions 55 Display menu options Blank Screen 33 Brightness 32 Color 33 Contrast 33 Reset All 33 Tint 32 Display Messages 39 Display Startup Screen 39 displaying on-screen menus 30 startup screen 39 status messages 39 E extension cable 60 F focus range 56 fuzzy lines 36 78 Manual Sync 36 Manual Tracking 36 Vert. Position 37 N NTSC video 37 K Kensington lock 49 keypad buttons menu 30 source 30 standby 30 volume 30 O on-screen menus Audio menu 34 changing functions 31 changing language of 40 Controls menu 37 Display menu 32 displaying 31 Image menu 35 Language menu 40 Status menu 40 L lamp ordering 59 replacing 46 turns off unexpectedly 53 lamp hour counter 41 Language menu 40 language, selecting for menus 40 laptop computers activation sequence to allow secondary display 61 connecting IBM-compatible 15 lens cap 59 cleaning 45 P PAL video 32, 37 Plug and Play 39 power cord connecting 22 power switch 22, 23 power up sequence 22, 51 project from behind the screen 38 R rear projection 38 relative humidity 55 remote control ordering 60 replacing the batteries 49 using 26, 29 replacing lamp module 46 re-positioning image on screen 36 resetting adjustments 33 resolution 3 M Macintosh computers compatibility 4 Menu button 31 menus. See on-screen menus monitor, colors don't match 53 mouse, connecting 15 3/99 79 Reference Manual KODAK DP900 / DP1100 S safety guidelines 1 SECAM video 32, 37 security feature 49 service numbers 9 setting up 11 SimulScan with PowerBooks 72 Source button 30 specifications 55 Standby button 30 Standby Time 38 startup screen 39 Status menu 40 support numbers 9 S-video connecting 20 adjusting 30, 34 buttons 30 W warranty 10, 81 weight 55 Z zooming the image 28 T temperature limits 55 test pattern 51 text not visible 50 tint, adjusting 32 treble, adjusting 34 troubleshooting 50 turning off the projector 23 turning on the projector 22 U USB mouse 16 V vertical lines displayed 36, 52 video 32 mirroring PowerBook 71 video standards 37 volume 80 3/99 WARRANTY TIME PERIOD Kodak warrants the KODAK DIGITAL SCIENCE DP 900 and DP 1100 Digital Projector (excluding lamps) to be free from malfunctions and defects in both materials and workmanship for two years from the date of purchase. WARRANTY REPAIR COVERAGE This warranty will be honored within the geographical location that the product was purchased. If the equipment does not function properly during the warranty period due to defects in either materials or workmanship, Kodak will, at its option, either repair or replace the equipment without charge, subject to the conditions and limitations stated herein. [. . . ]