User manual KODAK ESP 5

[. . . ] All-in-One Printer print copy scan User Guide Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2008 Kodak is a trademark of Eastman Kodak Company. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. , and any use of such marks is under license. (Image Recognition Integrated Systems), All Rights Reserved P/N 1K3269 Rev D January 2009 Table of Contents 1. Printer Overview 1 All-in-One Features . [. . . ] The available scan settings are in the table below: Scan Options Menu Options Scan What Scan To View Settings / Select or or Settings Document Photo Computer Memory Card 30 Kodak ESP 5 Printer User Guide Chapter 6 Menu Options Scan Destination Save As Defaults View Settings / Select or OK Settings File [Application Name] If you select Document, the scan is saved as a document file, even if the original is a photo. If you select Photo, a text document will be scanned as an image file, and cannot be read by optical character recognition software. You must create a list of one or more applications using Home Center software for any to display by name in the Scan Destination settings. Each application will appear as a separate setting in the display. In addition, before using a Scan Destination setting of File, familiarize yourself with the location where the file will be saved, and with the file naming setting. This will prevent problems later in finding the scan file on your computer. For more information, see the Home Center help. Kodak ESP 5 Printer User Guide 31 Scanning Your Pictures 32 Kodak ESP 5 Printer User Guide 7 Maintaining Your Printer The Kodak ESP 5 All-in-One printer requires little maintenance. However, you should regularly clean the scanner glass and lid backing to remove dust and fingerprints. Fingerprints and other debris on the glass or lid backing could slow down performance and affect the quality and accuracy of scanning. Service agreements are available in some countries. Contact dealers for Kodak products for more information. For recycling and or disposal information, contact your local authorities. In the U. S. , visit the Electronics Industry Alliance Web site at www. eiae. org. General Care Caution: Always disconnect the power on the this All-in-One printer before cleaning it. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. · To clean the printer, wipe the outside with a clean, dry cloth · Keep the surrounding area vacuumed and litter-free · Protect the printer from tobacco smoke, dust, sand, other small particles (such as crumbs), and liquid spills · Avoid placing objects on the printer · Keep the printer supplies away from direct sunlight and out of high-temperature environments · Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer · If the printer has been exposed to bad weather or has water inside it, turn it off and let it dry completely. If this does not solve the problem, contact customer support (see "Telephone Customer Support" on page 57) Kodak ESP 5 Printer User Guide 33 Maintaining Your Printer Cleaning the Scanner Glass For good copies and scans, ensure the printer's scanner glass and lid backing are clean; dust the exterior as needed. Warning: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, as they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device. 1 2 3 Unplug the printer and raise the lid. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. Dry the glass with a lint-free cloth. 4 When finished cleaning, plug in the printer. Cleaning the Scanner Lid Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak printer. Warning: Do not use paper-based wipes, as these might scratch the underside of the scanner lid. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. 1 2 3 Unplug the printer and raise the lid. [. . . ] To ensure compliance with FCC regulations, use only the shielded interface cables provided with the product, or additional specified components or accessories that can be used with the installation of the product. Caution: When using the Bluetooth interface with a Kodak printer, the transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. FCC and Industry Canada This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1 2 This device may not cause interference and This device must accept any interference, including interference that may cause undesired operation of the device 68 Kodak ESP 5 Printer User Guide Appendix B This device has been designed to operate with an antenna having a maximum gain of 1. 8dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. [. . . ]