User manual KODAK ESP 7 QUICK GUIDE

[. . . ] Handle ink cartridges carefully to avoid ink transfer. Black Ink Cartridge b) Insert the black ink cartridge into the printhead. 10 Cart ouch e d'en cre noire c) Press down on the ink cartridge until you hear it click into position. 10 10 d) Repeat steps 4a - 4c with the color ink cartridge. e) Close the printer access door and press OK. www. kodak. com/go/aiosupport 5 5 Paper output tray. Bottom paper tray. Loading Paper and Calibrating a) Raise the paper output tray and pull the bottom paper tray out. b) Load plain paper and slide the 2 paper edge guides against the left and front edge of the paper. Bottom paper tray extender tab c) Close the bottom paper tray. NOTE: If the bottom paper tray will not close all the way, press the bottom paper tray extender tab on the front left edge of the tray while pushing the tray in. d) Pull out the top paper tray and insert 4x6 in. Slide the paper edge guides, close the top paper tray. [. . . ] The User Guide is installed with your KODAK Inkjet Printer Software and is located here: Start Programs Kodak User Guide Setting your KODAK All-in-One Printer as the default on your WINDOWS OS WINDOWS XP: Start Printers and Faxes. Right-click the icon for the printer you want to use as the default printer, and then click Set As Default Printer. Start Control Panel Hardware and Sound Printers. Right-click on the printer you want to use, and then click Set As Default Printer. WINDOWS VISTA: 10 www. kodak. com/go/aiosupport 7 Installing Software on MACINTOSH OS MACINTOSH USB CONNECTION a) Connect the USB cable to the USB port on the printer and to your MACINTOSH Computer. b) Load the KODAK Inkjet Printer Software CD into the CD-ROM drive. The KODAK Inkjet Printer Software installer window should be displayed. If not, double-click the KODAK Inkjet Printer Software CD icon on the desktop. Follow the on-screen prompts until installation is complete. NETWORK CONNECTION a) Make sure the printer and computer are set up. b) Once software installation is completed: 1. Double-click on Print & Fax System Preferences and click (+) to add a printer. Look for your printer with a connection type of Bonjour, and select it. NOTE: If you are prompted by your firewall during software installation, be sure to allow access. For additional information go to www. kodak. com/go/inkjetnetworking. NOTE: If you have additional computers on your network, install the Kodak Inkjet Printer Software on each computer. The User Guide is installed with your KODAK Inkjet Printer Software and is located here: Library Documentation Kodak AiO Printers MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH MACINTOSHMACINTOSH FOR WINDOWS & MACINTOSH Setting your KODAK All-in-One Printer as the default on your MACINTOSH OS MAC OS X defaults to the printer most recently added. To change the default printer, follow these steps: 1. From the print dialog, choose Edit Printer List from the Printer pop-up menu. Choose Make Default from the Printer's menu. www. kodak. com/go/aiosupport 11 Warranty Information Limited Warranty Kodak warrants Kodak consumer electronic products and accessories ("Products"), excluding batteries, to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair. Limited Warranty Coverage Warranty service is only available from within the country where the Products were originally purchased. You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. [. . . ] PLEASE DO NOT RETURN IT TO THE STORE. You can get support from the Internet. Visit www. kodak. com/go/aiosupport for information and help regarding your KODAK Printer. Kodak provides several methods to help you troubleshoot and solve problems with your KODAK Printer. First attempt to power cycle the printer by unplugging the printer. Wait 5 seconds, and then plug the power cord back into the printer. You should also confirm that you are using a 2. 0 USB cable. [. . . ]