User manual KODAK ESP 9200

[. . . ] Make sure the left paper-edge guide is to the far left. Move the front paper-edge guide forward. / 28 cm, press and pull out the paper tray extender. Fan and stack the paper, then insert it into the tray. [. . . ] For more detailed information about scanning and for information on scanning from a computer with MAC OS, see the Extended User Guide at www. Before sending or receiving faxes, make sure that a wall phone line is plugged into the Line in port on the back of the printer. Enter a fax number using the numeric keypad. (If not, press Auto Answer to turn it on. You can order ink cartridges, paper, and accessories online. To order supplies, make sure that your computer is connected to the Internet, then: 1. Select the item(s) you want to buy, then follow the on-screen instructions. Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Use the following information to help troubleshoot problems with your printer. Printer does not power on Printer not detected Make sure you are using the power cord that came with your printer. ⷠMake sure the power cord is connected to the AC adapter and is plugged into an outlet or power strip. ⷠMake sure that your printer is plugged in and turned on, and that the on/off LED is glowing steadily. ⷠIf you are using a USB cable, make sure that: ­ it is connected to both your printer and your computer. ­ you restart the computer if the USB cable was disconnected from The printer then reconnected, or if power to the printer was interrupted. ⷠIf you are using a wireless connection, make sure that: Services needed for your printer. (The printhead and ink cartridges are installed correctly when you hear them click into place. ) · For best results, use KODAK Paper or a paper with the COLORLOK Technology logo on the package. ⷠMake sure the paper is loaded correctly (see page 4). Make sure the cartridges click into place. ⷠPress down on the center latch, open the duplexer cover, and gently remove any paper from inside the duplexer; close the duplexer cover. ⷠPress the side detents on the duplexer, and remove the duplexer to access the cleanout area; remove any paper or debris, then replace the duplexer. ⷠMake sure the paper in the tray is free of tears or creases. [. . . ] You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. [. . . ]