User manual KODAK I50

[. . . ] i50 Scanner i60 Scanner User's Guide A-61182 Contents Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety and regulatory agency approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note that not all features are available at all times. The availability of some features may depend on the scanner model or other feature selections. Scan Method Select how you want to scan on the Scan Method drop-down menu. TWAIN Simplex/One-page--select this setting if you are using the automatic document feeder (ADF) to scan one side of a document at a time. Simplex/Multi-page--select this setting if you are using the automatic document feeder (ADF) to scan one side of a document at a time in a batch of documents. Flatbed--select this setting if you are using the flatbed to scan one side of a document at a time. Duplex/One-page--select this setting if you are using the automatic document feeder (ADF) to scan both sides of one document at a time (i60 Scanner only). Duplex/Multi-page--select this setting if you are using the automatic document feeder (ADF) to scan both sides of documents in a batch of documents (i60 Scanner only). ISIS Simplex--select this setting if you are using the automatic document feeder (ADF) to scan one side of a document at a time in a batch of documents. Flatbed--select this setting if you are using the flatbed to scan one side of a document at a time. Duplex--select this setting if you are using the automatic document feeder (ADF) to scan both sides of documents in a batch of documents (i60 Scanner only). A-61182 October 2001 13 Image Type Select the mode you want to use for your scans on the Image Type drop-down menu. Black and White--the image appears in black and white with no intermediate shades of gray. That means that each pixel of the image is either 100% black or 100% white. Choose Black and White if you are scanning text or pen and ink drawings. Since only one bit of black or white information is required per pixel, the file size of a Black and White image is only about 1/24 the size of a 24-Bit Color image. Halftone--a halftone is a picture like that which is usually seen in a newspaper or magazine. Since a halftone is a type of black-and-white image, the file size of a halftone image is only about 1/24 the size of a 24-Bit Color image. Halftone simulates grayscale by using varying dot sizes. If you view a halftone image at a certain distance, it looks much like a grayscale image, but the file size is smaller. When you select Halftone, a submenu appears that allows you to select a halftone pattern. 8-Bit Gray--a single-channel image consists of at least 256 shades of gray. An 8-bit scanner produces a grayscale image with 1024 shades of gray between pure black and pure white. Choose this option if you are scanning black-and-white photographs. With 8 bits of color information per pixel, the file size of an image is eight times larger than a Black and White image and 1/3 the size of a 24-Bit Color image. 8-Bit Color--an 8-Bit Color image provides 256 color hues in the image. [. . . ] This may cause the scanner to function improperly. Only two SCSI terminators can be connected to the SCSI daisy chain: one is at the end of the SCSI device and the other is already in the host adapter. · · · · · · · · · · · · · 30 A-61182 October 2001 Problem When the scanner is powered up, the lamp does not light. · · Solution The lamp is dead. If the power light on the ADF is flashing, the power adapter is malfunctioning or the main board has short-circuited. [. . . ]