User manual KODAK K8500

[. . . ] Eastman Kodak Company is an authorized licensee of the SD trademark. Kodak, EasyShare, Perfect Touch, ImageLink, and XtraLife are trademarks of Eastman Kodak Company. P/N 4J3802_en Product features Front/top/side view 1 2 3 4 5 6 21 20 19 18 17 16 1 2 3 4 5 6 7 8 9 Paper light Battery charging lights/ Refresh button Color Cartridge light Transfer button/light Slide Show button/light Red Eye Reduction button/light Print button/light 4-way control IR sensor 7 8 9 10 15 14 13 12 11 11 Paper tray door 12 Bluetooth wireless technology button/light 13 Cancel button 14 Picture Size button 15 Picture Size lights 16 Accessory door 17 Card slot light 18 SDIO/SD/MMC card slot 19 USB device connector light 20 USB device connector 21 Audio/Video (A/V) out connector , , , 10 Paper tray www. kodak. com/go/support i Product features Back/top/side view 1 2 7 1 2 3 Camera connector Power connector (DC-in) 6 4 5 6 7 5 Cooling vent 4 3 Slot for paper path Color cartridge (installed as shown) Cartridge door USB connector (to computer) ii www. kodak. com/go/support Table of contents 1 1 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Finding a location for your printer dock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the custom camera insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: When properly inserted, the card sticks out slightly, serving as an antenna for receiving Wi-Fi signals. Notched corner To remove the card, push it in, then release it. When the card is partially ejected, pull it out. 3 Make sure the printer driver from the included Kodak EasyShare software CD is installed on your computer (see page 22), then connect the printer dock to your computer with the USB cable (see page 24). www. kodak. com/go/support 38 Using the wireless features of your printer dock 4 Configure the printer dock Wi-Fi settings (such as SSID and security) and add the printer dock as a wireless printer on your Wi-Fi wireless network: Windows OS-based computer-- Configure the printer dock Wi-Fi settings: a From the Start menu, select Programs (or All Programs). b Open the Kodak folder, then open the Kodak EasyShare printer dock folder. c Select Kodak wireless printer configuration utility. The configuration utility opens on your computer. e Change settings as necessary to match the settings of your Wi-Fi wireless network. Click Wizard to help guide you through the wireless setup process. See the configuration utility Help for details. Add the printer dock as a wireless printer to your computer: a From the Start menu, select Programs (or All Programs). b Open the Kodak folder, then open the Kodak EasyShare printer dock folder. c Select Kodak wireless printer computer setup assistant. NOTE: When using the remote control or a wireless infrared device with your printer dock, make sure the IR sensor on the printer dock is not obstructed. For more information, visit www. irda. org. IR sensor Purchase a Kodak remote control, a Kodak wireless USB adapter, and other accessories at a retailer of Kodak products, or visit www. kodak. com/go/accessories. Also, be sure to visit periodically for new wireless printing accessories. Using the Kodak remote control The Kodak remote control (sold separately) lets you view and print pictures and control your printer dock remotely. The remote control is especially helpful when using your television as a display (see page 43). See the remote control user's guide for details. www. kodak. com/go/support 42 6 Reviewing pictures Reviewing pictures on the camera screen 1 Dock your digital camera (see page 8). 2 Press on the printer dock to scroll through the pictures, or press the Slide Show button, (see page 44). Displaying pictures on a television With a docked camera, you can view pictures on a television, monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a monitor or when printed. ) 1 Open the accessory door on the printer dock. 2 Connect the A/V cable (included) from the printer dock A/V out connector to the television or monitor video-in port (yellow) and audio-in port (white). 3 Set Video Out (NTSC or PAL) on your camera to the format used in the region you live in. See your camera user's guide for details. A message appears on the camera screen asking you to select a video display. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 75 www. kodak. com/go/support Appendix If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]