User manual KODAK KC50

[. . . ] This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 2 Getting to Know Your Camera 1 2 3 4 5 6 Auto 6 7 11 10 9 8 9 3 12 13 14 15 16 24 OK !NO Uses 17 18 FIL M 23 22 21 20 19 4 Contents Need Help with Your Camera?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Camera Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Pull out just enough film to place the end of the film at the FILM-LOAD MARK 18 . (Be sure the end of the film is at the film-load mark or you may not get any pictures). FILM LOAD MARK Lay the film flat between the film-guide rails. If the end of the film extends past the film-load mark, gently push the excess back into the film cartridge. FILM-GUIDE RAILS 11 4. You should be able to read the film information in the FILM WINDOW 16 . CAUTION: Do not open the film door if you have film loaded in the camera. 5. Slide the LENS-COVER SWITCH 9 to uncover the LENS 8 and turn the camera on. Auto 12 6. Press the SHUTTER BUTTON 1 three times so that the PICTURE COUNTER 3 moves to "1. " NOTE: Because of limited space on the picture counter, dots stand for frames 2 and 3. Beginning at frame 4, only even numbers show. 13 Taking a Picture 1. Slide the LENS-COVER SWITCH 9 open until it locks into place. The camera will not work if the lens cover is not completely open. 2. For a sharp picture, be at least 4 ft (1. 2 m) from your subject in daylight and when using flash. 4 ft. Look through the VIEWFINDER EYEPIECE 13 to see your subject. Hold the camera steady and gently press the SHUTTER BUTTON 1 to take a picture. Wait for the FLASH/CAMERA-READY LIGHT 14 to turn "on" before you take the picture. The flash automatically fires when you take a picture (see TAKING FLASH PICTURES). Do not block the lens or flash with your fingers, strap, or any other object. 5. The film automatically advances so you can take your next picture. 15 Using the Focus Lock This camera automatically focuses on whatever is within the auto-focus frame of the veiwfinder eyepiece. If you want to take a picture with the subject positioned outside of the auto-focus frame, use the focus lock as follow: 1. Place the auto-focus frame on the subject that you want focused in the picture. AUTO-FOCUS BRACKETS VIEWFINDER 2. Partially depress and hold the SHUTTER BUTTON 1 to lock the focus position. 16 3. While still partially depressing the shutter button move the camera until your subject is where you want it. AUTO-FOCUS BRACKETS 4. Press the shutter button completely down to take the picture. VIEWFINDER 17 Taking Flash Pictures In dim light, such as indoors or outdoors in heavy shade, or on dark overcast days, you need flash. [. . . ] Press the Mode Button (b) to select the desired data type. Use the Select Button (c) to move between different parts of the displayed data. With the data displayed, pressing the select button in succession causes the settings for year, month, and then day to blink. On the data panel, the letter "M" indicates the location for the month and the apostrophe " ' " for the year. In time mode, pressing the select button successively causes the hour, minute, and then the colon to blink. [. . . ]