User manual KODAK PHOTO PRINTER 500

[. . . ] Kodak EasyShare photo printer 500 User's Guide www. kodak. com For interactive tutorials, www. kodak. com/go/howto Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2005 All screen images are simulated. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks is under license. Wi-Fi® is a registered trademark of the Wi-Fi Alliance. [. . . ] The configuration utility opens on your computer. See the configuration utility Help for details. 28 www. kodak. com/go/support Using the wireless features of your photo printer Printing and transferring over a Wi-Fi wireless network Insert a Kodak Wi-Fi® card (sold separately) into the card slot. Then, print and transfer pictures using your photo printer on an existing Wi-Fi wireless (Infrastructure) network, or print pictures directly to your photo printer over a Wi-Fi wireless device-to-device (Ad-Hoc) network. Example of a wireless Infrastructure network: Example of an Ad-Hoc network: www. kodak. com/go/support 29 Using the wireless features of your photo printer Adding your printer to a Wi-Fi wireless network 1 If a USB device is connected to the photo printer, disconnect it. Do not force the card into the card slot. 2 Push the Kodak Wi-Fi card into the card slot to seat the connector. The card slot light blinks as the photo printer scans for available networks. Once connected, the card slot light glows steady. NOTE: When properly inserted, the card sticks out slightly, serving as an antenna for receiving Wi-Fi signals. If the Kodak Wi-Fi card is already inserted but the connection is no longer available, remove then reinsert the card to re-establish the connection. To remove the card, push in and release it. When the card is ejected, pull it out. 3 Make sure the printer driver from the included Kodak EasyShare software CD is installed on your computer. Then connect the printer to your computer with the USB cable (see page 19). 4 Configure the printer Wi-Fi settings (such as SSID and security) and add the printer as a wireless printer on your Wi-Fi wireless network: Windows OS--Configure the printer Wi-Fi settings: a From the Start menu, select Programs (or All Programs). b Open the Kodak folder, then open the EasyShare printer folder. c Select Kodak wireless printer configuration utility. The configuration utility opens on your computer. e Change settings as necessary to match the settings of your Wi-Fi wireless network. Click Wizard to guide you through the wireless setup process. See the wireless configuration utility Help for details. 30 www. kodak. com/go/support Using the wireless features of your photo printer Add the printer as a wireless printer to your computer: a From the Start menu, select Programs (or All Programs). b Open the Kodak folder, then open the EasyShare printer folder. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. [. . . ]