User manual KODAK PLAYFULL WATERPROOF ZE2

[. . . ] KODAK PLAYFULL Waterproof Video Camera / Ze2 Extended user guide www. kodak. com For help with your camera: www. kodak. com/go/Ze2support Eastman Kodak Company Rochester, New York 14650 © Kodak, 2011 All screen images are simulated. Kodak and Playfull are trademarks of Eastman Kodak Company. ArcSoft and MediaImpression are trademarks of ArcSoft, Inc. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. [. . . ] Normal Color, Sepia, B&W, High Saturation, or 70s Film HD 720P, WVGA Adjust sensitivity of the internal microphone. Set the date/time Choose which sites and email addresses are offered when you share. Choose the setting (NTSC, PAL) for your region. Return all settings to their factory default. View firmware and ARCSOFT Software versions www. kodak. com/go/support 11 Advanced features Using the Settings menu in Review If you’re reviewing a video a picture you also get these choices and you press the Trim—See page 12. Settings Make Picture—See page 13. button Zoom and Pan—See page 13. Trimming a video Use the Trim Video feature to remove an unwanted video start and/or finish, leaving only the desired portion. 1 Press the Review button , then to find a video to trim. Optional: Play, then pause the video at the desired new start point. 3 Press to choose Trim Video, then press OK. 4 When prompted, press to move the Start marker to the new position, then press OK. Press to move the End marker to the new position, then press OK. NOTE: If you need to make adjustments, press to highlight the Start or End marker, then press to move it. 5 When prompted, preview your edit or save the edit without previewing. Save the video, or select Save As if you want to keep the existing video, as well. 12 www. kodak. com/go/support Advanced features Making a picture from a video You can choose a single frame from a video, then make it into a picture. (Size and quality depend on video resolution. ) 1 Press the Review button , then extract a single video frame. to find a video from which you want to 2 Play, then pause the video at the desired frame. to choose Make Picture, then press OK. 5 Follow the prompts to save the picture. Zooming and panning a picture 1 Press the Review button 2 Press 4 Use . When you turn on the camera again, you may need to reset the Date and Time. Camera Reset button www. kodak. com/go/support 15 Getting help Getting help on the Web Get support for your product (FAQs, troubleshooting information, arrange for repairs, etc. ) Purchase camera accessories (lenses, cards, etc. ) Download the latest camera firmware and software Register your camera Chat, e-mail, write, or phone Kodak (Chat not available in all languages) Get information on ARCSOFT Software Get creative tips and projects ideas www. kodak. com/go/Ze2support www. kodak. com/go/accessories www. kodak. com/go/Ze2downloads www. kodak. com/go/register www. kodak. com/go/contact www. arcsoft. com/support www. kodak. com/go/tips 16 www. kodak. com/go/support 5 Appendix Specifications Image Sensor—1/4-type CMOS, 1280 x 800 pixels Lens—3. 3 mm, f/2. 4 Zoom—2X digital LCD—5. 08 cm (2. 0 in. ); 112K pixels (480 x 234) Image Storage—32 MB internal memory (approximately 18 MB available for image storage. 1 MB equals one million bytes); optional SD/SDHC Card (The SD logo is a trademark of the SD Card Association. ) Maximum supported size: 32 GB SDHC. Focusing System—Fixed Focus Range—0. 5 m (1. 6 ft)–infinity (under water: 0. 7 m [2. 3 ft] –infinity) White Balance—Auto Exposure—Auto File Format—Still: JPEG with Kodak EXIF; Video: H. 264 (. MP4); Audio: MPEG-4 AAC LC ■ ■ ■ HDV/720p (1280 x 720 @ 30 fps) WVGA/30p (848 x 480 @ 30 fps) Still (4:3): 1 MP picture Shutter Speed—Auto Microphone—Mono ISO—Auto Speaker—Mono I/O Interface—USB 2. 0 (high speed); component output; HDMI www. kodak. com/go/support 17 Appendix Power—Built-in rechargeable Li-polymer battery, 450 mAh Waterproof —IEC 60529 IPX8 up to 3 m (9. 8 ft) Dustproof— IEC 60529 IP6X Shockproof —MIL-STD-810f shock equivalent 1. 5 m (5 ft) onto plywood IMPORTANT: The shock resistance and water resistance of this product are based on Kodak test results and do not constitute any guarantee that the product will perform, will not be damaged, or will not malfunction under such conditions. Though the camera is designed to withstand the effects of impact occurring during normal use, impact due to rough handling (such as throwing or dropping it from excessive heights) can cause serious damage. [. . . ] Remanufactured Products, parts and 20 www. kodak. com/go/support Appendix materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer. Limitations This warranty does not cover circumstances beyond Kodak's control. This warranty does not apply when failure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. Kodak makes no other express or implied warranty for this product. [. . . ]