User manual KODAK SC2

[. . . ] 4H7387 KODAK 2 Cell Smart Charger SC2 Using the batteries outside the temperature ranges may shorten battery life and decrease e ciency. Operating Instructions TIPS · For best performance, use only KODAK NiMH Batteries. · Charge the batteries before using (unless using pre-charged batteries). [. . . ] Recommended Temperature Ranges To use (discharge) the batteries: 32 to 122°F (0 to 50°C) To charge the batteries: 32 to 104°F (0 to 40°C) To store the batteries: -13 to 140°F (-10 to 20°C) 41 to 59°F (5 to 15°C) -- ideal Pre-charged NiMH batteries must be stored in a cool, dry location. SPECIFICATIONS Input 100-240V AC 50/60Hz 4W Output (AA) DC 1. 4V - 310 mA (AAA) DC 1. 4V - 120 mA Battery/Approx. Charge Times AA mAh Time (hrs. ) AAA mAh Time (hrs. ) 2700 10. 1 1000 9. 7 2600 9. 9 900 8. 5 2500 9. 5 850 8 2100 7. 9 1800 6. 8 1700 6. 4 · CAUTION: Keep dry. Do not use extension cords with this product. Do not operate charger if it has been subjected to electrical or physical shock or other damage. · For connection to a supply not in the U. S. A. , use an attachment plug adapter of the proper configuration for the power outlet. This battery charger is intended to be correctly oriented in a vertical or floor mount position. · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. · Children should be supervised to ensure that they do not play with the appliance. · It is normal for batteries to become warm while charging. SUPPORT www. kodak. com/go/support www. kodak. com/go/contact IMPORTANT SAFETY INSTRUCTIONS-- Save These Instructions · DANGER--TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. · DANGER--CHARGE ONLY BATTERIES SPECIFICALLY MARKED AS RECHARGEABLE. OTHER TYPES OF BATTERIES MAY LEAK, RUPTURE, OR EXPLODE AND CAUSE PERSONAL INJURY AND DAMAGE. Regulatory Information FCC compliance and advisory This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. Canadian DOC statement DOC Class B compliance--This Class B digital apparatus complies with Canadian ICES-003. Indicator Light + ­ Made in China for EASTMAN KODAK COMPANY Rochester, New York 14650 U. S. A. [. . . ]