User manual KODAK Z950

[. . . ] Review See the Extended user guide www. kodak. com/go/z950support www. kodak. com/go/z950support 7 ENGLISH ENGLISH 8 Transferring pictures/videos 1 Turn off the camera. 2 Connect the KODAK USB Cable, Model U-8. KODAK EASYSHARE Software opens on your computer and prompts you through the transfer process. Purchase accessories Learn more about connecting www. kodak. com/go/z950accessories www. kodak. com/go/howto www. kodak. com/go/easysharecenter Getting help from your camera Your camera offers a built-in Help system. It describes every setting for every menu choice. [. . . ] The settings, including Flash, are maintained for P, A, S, and M modes--even when you change modes or turn off the camera. Use Reset Camera (see page 35) to reset P, A, S, and M modes to their default settings. If using flash compensation, the flash cannot be in the Off setting (see page 14). www. kodak. com/go/z950support 17 Doing more with your camera Changing P, A, S, or M mode settings 1 Turn the Mode dial to P, A, S, or M. Press to change the setting. Note: A yellow setting indicates possible unsatisfactory results. (However, you can still take the picture. ) Aperture Shutter speed Exposure compensation Flash compensation Focus Mode ISO Aperture--(also known as f-stop) control the size of the lens opening, which determines the depth of field. Smaller f-stop numbers indicate a larger lens opening; good for low-light. Larger f-stop numbers indicate a smaller lens opening; keeps the main subject sharp; good for landscapes and well-lit conditions. Shutter Speed--control how long the shutter stays open. (To prevent blur, use a tripod for slow shutter speeds. ) Exposure Compensation--adjust the exposure. If the picture is too light, decrease the setting; if it's too dark, increase the setting. Flash Compensation--adjust flash brightness. Focus Mode--choose Auto, Close-up, Landscape, or Manual Focus. ISO--adjust the camera's sensitivity to light. Higher ISO indicates greater sensitivity. 18 www. kodak. com/go/easysharecenter 2 2 Press Working with pictures/videos button. button, then follow the screen prompts. Deleting pictures/videos 1 Press the Review 3 Press the Delete to find a picture/video. Understanding the review icons Protected Upload tag Favorite Review mode Email mark Print mark/number of prints Picture/Video number Relative picture/video number PREFECT TOUCH Technology Previous/Next Text tag name Battery level See the Extended user guide www. kodak. com/go/z950support www. kodak. com/go/z950support 19 3 1 Share your stories! Pictures start here!2 3 Transfer pictures to your computer. Load software. Take pictures. Pictures become stories here! KODAK All-in-One Printers KODAK Picture Kiosk www. kodak. com/go/tips 20 www. kodak. com/go/easysharecenter 4 Status Solving camera problems Solution Install new battery (see page 1). Remove the battery, then reinsert or replace it. If the camera still Camera does not turn on. Camera does not turn off. does not function, visit www. kodak. com/go/z950support and select Interactive Troubleshooting & Repairs. In Review mode, a blue Transfer the picture to the computer (see page 8), then format the card or internal memory. or black screen is displayed instead of a Caution: Formatting a card deletes all pictures and videos, including protected files. Flash does not fire Check the flash setting, and change as needed (see page 14). NOTE: The flash does not fire in all modes. Memory card is almost Transfer the pictures to the computer (see page 8). or entirely full Delete pictures from the card (see page 19) or insert a new card. [. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]