User manual KOMPERNASS BALANCE KH 5506-5507-5508 BODY FAT AND WATER ANALYSIS BALANCE MADE OF GLASS

[. . . ] · The scale is equipped with sensitive electronic components. For this reason, do not place the scale next to heat sources or in locations with excessive moisture. Appendix: Body fat and water contents A regular check of fat and weight is a basic pre-requisite for your health and fitness. Fat contributes considerably to the loading of the organism especially the coronary circulation system. [. . . ] Enter your age by pressing the keys "^" or "v" and press the key to confirm. i 6. Enter body size: The body size in centimetres will appear in the display above the line. Enter your body size by pressing the keys "^" or "v" and press the key to confirm. Note: if you have selected the dimensional unit "lb" the body size will be shown in inches. i 7. Following the setting of all personal data the storage place just programmed will flash on the display. You can now switch off the remote control by pressing the key U or program additional storage places by pressing the keys "^" or "v". If no keys are pressed, the remote control will switch itself off automatically after 60 seconds. Simple weighing (without simultaneous measurement of body fat and water contents) Do not remove the remote control if you merely want to weigh yourself. The running display "bALAnCE" appears above the line, the display "---- kg" below the line. After approximately 2 seconds the green LED will light up and "0. 0kg" appears below the line. The scale is now ready for operation. 2. Step onto the scale and remain still for weighing. When the scale has established the approximate weight, "H" will be shown on the display. This display stops flashing as soon as the weight has been established exactly. If you remain on the scale it will switch off after approximately 60 seconds. When you get off the scale, flashing "H" is displayed 3 times and the display "0. 0kg" returns. The scale is now ready again for weighing. 7 5. If no weighing process takes place, the scale switches off automatically after 60 seconds. Establishing body fat and water contents In order to establish your body fat and water contents you must have previously stored your personal data (see Chapter 6). Remove the remote control from the scale. Press the key U to switch on the remote control. The running display "bALAnCE" appears on the display above the line, the display "---- kg" appears below the line. 2. The running display "bALAnCE" appears on the display above the line, and the display "---- kg" below the line. After approximately 2 seconds the green LED display lights up and "0. 0kg" appears on the display below the line. [. . . ] Feet that are too dry can however affect the measurement. In this case moisten your feet with a moist cloth and repeat the measurement. - stand as still as possible on the scale and do not interrupt the measuring process. The remote control is not properly connected to the scale or the scale is off. [. . . ]