User manual KOMPERNASS BALANCE KH 8099 BLOOD PRESSURE METER

[. . . ] Otherwise the scales and display remote control unit can be damaged beyond repair. The scales and display remote control unit can only be operated at temperatures between 10° and 40° Celsius. The scales should be kept within this temperature range even while not being used. Temperatures outside of this range can result in malfunctioning or longterm damages. [. . . ] First of all you stand on the right and left sensor areas. Otherwise the scales can tilt to the side and be damaged beyond repair. Please make sure that the surface of the scales is dry before you stand on it. Measuring body weight, body fat, muscle mass and body water percentages as well as caloric requirement Always stand on the scales without shoes and socks on. Otherwise it is not possible to measure body fat, body water, muscle mass and caloric requirement. Furthermore the displayed body weight will be higher than your actual body weight. Body weight, body fat and body water percentages are not subject to considerable fluctuation within a single day. These natural fluctuations can result in considerable differences between measurements taken at different times of the day. Therefore you should make sure to carry out measurements . Do not place a load of more than 180 kilograms on the scales!Otherwise the scales could be damaged beyond repair!This informational material includes average values for body fat, body water and muscle mass percentages according to age and gender. If you remain standing on the scales, the device will automatically shut off after 30 seconds. 0 kg will appear again on the display screen after a few seconds. The scales are now ready for further body weight measurement. In order to display comparisons of current and previous measurement values for other measurement areas: Press the up or down button briefly. Each time you press one of these buttons, one of the measurement areas (body fat percentage, muscle mass percentage, body water percentage and caloric requirement) are displayed. The current measurement result is displayed for each measurement area and the previous measurement result blinks in the display screen. You can compare all currently displayed measurements with the most recently measured results. The comparison display does not function in guest mode, because no measurement values are stored in this mode. Weight body fat percentage muscle mass percentage body water percentage Press the on/off button to turn on the display remote control unit. Subsequently the number of one of the memory locations for personal data will blink on the screen. [. . . ] Please make sure no water or moisture can enter the scales or display remote control unit. Battery acid could leak out, especially if the batteries are old. Therefore you should remove all batteries if you do not plan to use the scales and remote control unit for long periods of time. This protects the scales and display remote control unit from damages resulting from battery acid leakage. [. . . ]