User manual KOMPERNASS BIFINETT KH 1098 COFFEE MAKER

[. . . ] ⷠDo not hold your hands in the rising steam. ⷠNever move/transport the appliance during the brewing process. NEVER grasp the appliance, power cable or power plug with wet hands. ⷠTo disconnect, always pull out the plug itself out of the power socket, do not pull the power cable. [. . . ] When the brewing process is complete, the coffee is kept warm by the keep-warm plate r for two hours. On the expiry of this period the coffee maker switches itself. ⷠShould you wish to switch the coffee maker off earlier, repeatedly press the button ON/AUTO/OFF s until the indicator lamps y / u are extinguished. After the brewing process the coffee machine must first cool down, for at least 10 minutes, before you start another brew. If you do not, there is a risk of being scalded by escaping steam!With this coffee maker you can fill a cup with coffee using only one hand: · When there is coffee in the glass jug l, press and hold your cup against the coffee button d. ⷠWhen the cup is full, remove the cup from the coffee button d. ⷠAny drips that might fall will be caught by the driptray grill f. note: Empty the driptray below the driptray grill f regularly. Note: If you pour coffee using the coffee button d, a small amount of coffee will always be left in the glass jug l. You can also pour coffee from the glass jug l in the usual manner: · lift the glass jug l and then pull it to the front. Note: If, before you lift the glass jug l out, you have activated the coffee button d, it can happen that a few drops of coffee will drip from the glass jug l. By use of the button PROG a, you can programme the coffee maker so that it starts the brewing process at a pre-determined time (Timer function). First, always fill the filter q in the filter basket 1( with coffee powder and the water tank e with water. place the glass jug l in the coffee maker. Ensure that the glass jug l is empty and the water tank e is not filled beyond the Max marking. When the desired start time has been entered in, press the button PROG a once more. The coffee maker will now start the brewing process at the programmed time. Always wait until the coffee maker has cooled down before cleaning it. Clean the glass jug l, filter q and filter basket 1( in mild sudsy water and rinse them with lots of clean and clear water. note: Clean the Filter q immediately after use. If left until later, it will be more difficult to clean. [. . . ] In case of doubt, please contact your waste disposal centre. The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. [. . . ]