User manual KOMPERNASS BIFINETT KH 1191 ELECTRICAL BISCUIT SHAPER

[. . . ] Always pay attention to what you are doing and act with common sense. Never use the appliance when you are distracted or don't feel well. · Ensure that the appliance is correctly and completely assembled before taking it into use. · Remove the plug from the socket if the appliance is not being used, when removing components and for cleaning. Intended usage The Biscuit Shaper KH 1191 is intended for the shaping of biscuits and for decorating cakes etc. [. . . ] Do not use Teflon, fats or oil paper, as the biscuits then do not keep their shape. · Ensure that the lock ring ¸ sits firmly on the container and that the container is correctly mounted on the motor unit before you switch the appliance on. Place the direction switch onto the arrow pointing upwards . Direct the biscuit shaper over the baking tray. Press on the start switch until the first biscuit has been formed. Release the start switch and direct the biscuit shaper at another position. How long you must press the start switch is dependant on the desired size and shape of the biscuit. If you press the start switch only shortly, you will form a small biscuit. The longer you press the start switch , the larger the biscuit will be. Repeat the steps until you have shaped a sufficient number of biscuits. Note: Should the pastry be too sticky, place it in the refrigerator for 15 minutes. Adding decorations Tips: · Use the nozzles exclusively for shaping fluid-like substances, such as whipped cream. · The decoration substance must have a soft and creamy consistency, otherwise it will block the nozzle . · Press the start switch only shortly to start with, to see how the substance responds. It can happen that the substance may continue to flow out for a short time. Place the direction switch onto the arrow pointing upwards . Place the lock device on the nozzle adaptor onto "OPEN". Hold the Biscuit Shaper at a slight angle. As soon as the decorative substance starts to flow from the nozzle , move the Biscuit Shaper in accord with the decorative design you wish to create. Note: Should the pusher block during use, it could be that the substance or the pastry is too firm. the pastry and, if possible, blend some fluids into it. Refilling with pastry or decorative mixture 1. Place the direction switch onto the arrow pointing downwards . Press and hold the start button until the pusher has returned itself to the MAX marking. -7- KH1191 Danger!: Remove the plug from the wall socket before refilling the container. [. . . ] Rinse all parts, except the motor unit , in a mild detergent. Note: Do not clean any parts in a dishwasher!The material could be irreparably damaged! Warranty & service The warranty conditions and the service address can be found in the warranty booklet. Importer KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www. kompernass. com Note: The manufacturer is constantly working on the further development of all types and models. Therefore please accept that changes are possible to the actual items supplied (equipment, shape, technology). -9- KH1191 Recipes You can process commercially available ready-made pastry with the Biscuit Shaper. [. . . ]