User manual KOMPERNASS BIFINETT KH 6598 WATER KETTLE

[. . . ] Incorrect operation and improper harding can lead to faults on the device and injuries to the user. In the event of improper use or incorrect handling, no liability can be accepted for any damages that may occur. Before you put the plug into the socket, please check that the type of current and mains voltage correspond to the instructions on the nameplate on the underside of the appliance. [. . . ] Therefore, children should never use electrical household appliances unsupervised. Use the kettIe only with the base supplied, and do not use the base for any other purposes. Check the level indicator (MAX) inside the main body when filling. Dangerous: If the kettIe is overfilled, boiling water may be ejected. Never remove the kettle from its base while in operation. Take care to close the lid properly before switching on. Otherwise, the appliance will not switch off automaticalIy and hot water may overflow. The kettle is for heating water only, and is not to be used for any other fluitis. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similar qualified person in order to avoid a hazard. Warning: Do not remove the lid while the water is boiling. Kettle is only to be used with the stand provided. TECHNICAL DATA: Voltage: 230V AC Power: 220OW Volume: 1. 7 L BEFORE FIRST USE 01. Clean the kettle by filling with cIean water and bringing to the boil (see "operation"). Pour away the water then repeat the operation. Wind out the mains cord only as much as necessary. Draw it out through the opening in the base and connect it to a suitable mains socket. Open the lid and pour water of the desired quantity in. [. . . ] CLEANING AND CARE PIease also observe the safety advice for this. Always remove the plug from the mains socket before cleaning the base. Clean the outside of the kettle and the base with a soft dry cloth. [. . . ]