User manual KOMPERNASS EBENCH KH 2025 DIGITAL WORLD RADIO RECEIVER

[. . . ] KH2025_IB_Receiver_UK 01. 04. 2004 11:39 Uhr Seite 2 Kompernaß Handelsgesellschaft mbH Burgstraße 21 · D-44867 Bochum www. kompernass. com ID-Nr. : KH 2025/2026-03/04 KH2025_IB_Receiver_UK 01. 04. 2004 11:40 Uhr Seite 3 KH 2025 Digitaler Weltempfänger Bedienungsanleitung UK KH2025_IB_Receiver_UK 01. 04. 2004 11:40 Uhr Seite 4 KH 2025 KH2025_IB_Receiver_UK 01. 04. 2004 11:40 Uhr Seite 5 ³ ¹ ¸ µ KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 3 Digital World Receiver e-bench KH 2025 / KH 2026 Keep this manual for future reference ­ and also pass it on with the device to any future owners. Contents 1. Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The device stops as soon as a sufficiently strong station is found. Pressing the button again will continue the scan. 9 KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 10 e) Short Wave (SW) Sensitivity If the the scan process frequently lasts too long, for instance because too many signals are received in the evening, the sensitivity can be reduced to short wave (local reception). ¿ Set the sensitiviy switch to - RX for local reception - LX for long-range reception. f) Sensitivity and Antennas The telescoping antenna is responsible for USW and short wave (SW). You can alter the reception strength by adjusting the length, inclination and direction of the antenna. A ferrite antenna is built into the device for medium wave (MW) and long wave (LW) reception. Turn the entire device to alter the reception strength. 7. Memory A total of 160 memory positions are available ­ specifically . . . 5 blocks of 10 positions each for USW 5 blocks of 10 positions each for MW 5 blocks of 10 positions each for SW 1 block with 10 positions for LW. The blocks are also designated as "pages". This division into blocks is useful to allow the stations to be saved according to a meaningful organisation principle. by type: music, news, sports by location: local stations or frequently visited travel destinations by person: if multiple family members use the device 10 KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 11 a) Saving Stations When you have found a station that you would like to save: » Press the button MEMORY. Two small windows then appear in the display: - PAGE containing the numbers 1. . . 5 - MEM containing an empty field. Make your selection within the next 10 seconds, otherwise this display disappears and you must start this step again. Press the button PAGE until the small window PAGE contains the number for the block 1. . . 5 to which you would like to save the station. Once you have selected the desired block (page), . . . · then press one of the buttons M0/5 M1/6 M2/7 M3/8 M4/9 to select the memory position 0. . . 9. The number associated with the memory position then appears in the small window MEM. Note: These buttons each have two assignments. Each press switches between the two assignments (e. g between 0 and 5). When you have selected the desired memory position, . . . The station is now saved. 11 KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 12 b) Loading Saved Stations If you would like to load a saved station: ² First select the band (reception range). Press the button PAGE until the small window PAGE contains the number for the block 1. . . 5 from which you would like to load the station. · Then press one of the buttons M0/5 M1/6 M2/7 M3/8 M4/9 until the number of the desired memory position appears in the second small window MEM. [. . . ] If you would like to completely deactivate the alarm function, this can only be done as follows. Note: The configured alarm and clock times are lost if the device is without power for longer than 30 seconds, for instance while changing the batteries. Be sure to check all configured times afterward! 17 KH2025-2026_IB_UK 01. 04. 2004 11:29 Uhr Seite 18 i) Date Alarm (SDA) You can program a reminder alarm to go off on a specific date. On this day, an alarm will go off for about 10 minutes on every hour starting at 8:00 a. m. [. . . ]