User manual KOMPERNASS EBENCH KH 2236-2237-2238-2239 CLOCK RADIO

[. . . ] Ensure that the rating of the local power supply tallies completely with the details given on the rating plate of the appliance. Make sure that the power cable never becomes wet or damp during operation. Lay the cable such that it does not get clamped or otherwise damaged. Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. [. . . ] Children frequently underestimate the danger from electrical appliances. Ensure that the appliance stands with a safe and secure positioning. Do not operate the appliance if it has sustained a fall or is damaged. Arrange for the appliance to be checked and/or repaired by qualified technicians. Children can put batteries into their mouths and swallow them. Electro-magnetic fields This appliance lies within the legal limits for electromagnetic compatibility!If you still have any doubts regarding its use in bedrooms: · It is completely safe to install the clock at a distance of half a meter away from the bed. From this distance the fields are not present, even for electro-sensitive people. · Note: Check the battery for power-cut protection annually, and replace it if necessary. · · · Note: This appliance is equipped with nonslip rubber feet. As furniture surfaces may be made of a variety of materials and are treated with many different types of cleaning agents, it cannot be completely ruled out that some substances contain ingredients which may corrode the rubber rests and soften them. If possible place an anti-slip material under the feet of the appliance. · · · -4- Operating Elements q w e r t y u i o a s d f g Button HOUR Button MIN Button ALARM Button TIME SLEEP Button Frequency scale Button SNOOZE Display Slider switch (ON/OFF/AUTO) Battery compartment TUNING knob Volume controller VOLUME/BUZZ Wave band selector (AM/FM) Slider switch for display brightness (HI/MED/LOW) h Wire aerial j Power cable k Button ALARM OFF (Only Model KH 2238) Important! Do not permit small children to play with plastic packaging. · Position the radio alarm on a level and horizontal surface. Inserting the batteries Power-cut protection With the insertion of a 9 V block battery (Typ 6LR61) you can avoid that the functioning of the appliance is interrupted and programmed data, for example time and alarm times, are lost through a power cut. The battery ensures that the appliance continues to function in emergency operation during the power cut. When power is restored, the correct time automatically appears on the display i. Commissioning Placing · · Take the radio alarm and all ancillaries out of the packaging. Remove all transport restraints and adhesive tape/films. · Note: The alarm, radio and display do not function with battery-power alone. Open the battery compartment a on the underside and insert a 9 V block battery (Type 6LR61). -5- Interaction with batteries Leaking batteries can cause damage to the radio alarm. · If you do not intend to use the appliance for an extended period, remove the batteries. · Should the batteries leak, clean the battery compartment with a dry cloth whilst wearing protective gloves. Setting the clock If you are setting up the appliance for the first time after inserting a new battery: · Whilst holding the button TIME r pressed down: · Press several times in succession, or simply press and hold the button HOUR q, to adjust the hour setting. · Release the button HOUR q, as soon as the desired hour setting appears in the display i. · Press several times in succession, or simply press and hold the button MIN w, to adjust the minute setting. · Release the button MIN w as soon as the desired minute setting appears in the display i. The adjusted time will be automatically accepted as soon as the button TIME r is released. Note: Rechargable batteries cannot be charged via the battery connection. In the event of an extended power cut (several hours), the clock and alarm times must be checked and possibly re-adjusted. Assembly Before operating the device, make sure that it is in a faultfree condition. [. . . ] On re-pressing the button SLEEP t, the switch-off time will revert to 59 minutes. · · -8- Adjust display brightness (Nightlight-Function) The brightness of the display i can be set to 3 levels. · Place the sliding switch o into the position HI, MED or LOW to adjust the desired brightness of the display i. Disposal Disposing of the appliance Do not dispose of the appliance in your normal domestic waste. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. [. . . ]