Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KOMPERNASS KH 4042 JUMP LEADS. We hope that this KOMPERNASS KH 4042 JUMP LEADS user guide will be useful to you.
Lastmanuals help download the user guide KOMPERNASS KH 4042 JUMP LEADS.
Manual abstract: user guide KOMPERNASS KH 4042 JUMP LEADS
Detailed instructions for use are in the User's Guide.
[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. These battery jumper leads are intended exclusively for private use and for utilisation in the brief bridging of a flat standard commercial starter battery (lead battery for vehicles) with a power source of 12 V - 24 V. [. . . ] Always follow the sequence described for attaching and detaching the cables, and for starting the engines!Under no circumstances should you connect the black cable directly to the minus pole of the receiver battery, should you do so there is the risk that detonating gas may explode when making/breaking the connection!Keep open lights, heat or electrical sparks well away from the batteries. The battery jumper leads must be placed so that they cannot be caught by rotating parts within the engine compartment. There is also a risk of personal injury! Exercise caution when touching the clamps, due to the high electricity flow they can become very hot. ALWAYS first connect the red cable with the plus pole of the receiver battery and THEN with the plus pole of the supplier battery. First connect the red cable with the red pole clamp to the plus pole on the receiver battery (1). AFTER both plus poles are connected to each other by the red cable, connect the black cable with the black pole clamp to the minus pole on the supplier battery (3). On the motor block or to a metal part connected directly with the motor block) that is well away from the battery on the receiver vehicle (4). The starting attempt may last for a maximum of 15 seconds. Wait for at least 1 minute between start attempts. After the receiver vehicle has been successfully started, allow its engine to run for about 2 or 3 minutes - until it runs smoothly. There is a risk of explosion due to possible detonating gas development! [. . . ] Den här startkabeln får endast användas till ottomotorer med en slaglängd på upp till 2500 cm3 (inte till dieselmotorer!Koppla alltid först den röda kabeln till pluspolen på det batteri som ska startas och därefter till pluspolen på det batteri som ska leverera ström. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KOMPERNASS KH 4042 JUMP LEADS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KOMPERNASS KH 4042 JUMP LEADS will begin.
