User manual KOMPERNASS KH 4077 HALOGEN WORK SPOTLIGHTS

[. . . ] Inform children about the appliance and its potential dangers and that they should not play with it. Always remove the plug from electrical sockets before exchanging the halogen lamps. Allow the halogen lamps to cool before removing them. [. . . ] Q ON/OFF Switch w Floodlight lever e Halogen floodlight r Protective grill t Knurled screw y Crossbeam u Telescopic stand i Power cable o Knurled screw a Fixing ring s Distributor box d Knurled screw f Fixing screw g Glass cover Into the recesses on the corners before the glass covering g. ³ Squeeze the protective grill r so far together that the pegs on the other side of the protective grill can be inserted into the recesses there. ³ Do the same with the second halogen spotlight ³ Insert the knurled screw t with the washer through the hole in the bracket of the halogen floodlight e. ³ Insert the halogen floodlight e with the knurled screw t in the pre-drilled hole on the crossbeam y. Ensure that the Stoppers are located behind the halogen floodlights e. ³ Turn the knurled screw t until it is tight. Never insert the plug into an electrical socket until the appliance has been completely assembled. Only touch the halogen lamps when they are in a switched-off and cooled-down condition. Never touch the lightbulb with bare hands, always use a clean and dry lint-free cloth. ³ Insert the knurled screw d first of all through the hole in the distributer box s, then through the hole in the crossbeam y. ³ Now assemble the crossbeam y and the distributor box s with the assistance of the knurled screw d on the telescopic stand u. ³ Turn the knurled screw d until it is tight. Opening up the pedestal base ³ To set up the telescopic stand u, loosen the knurled screw, o. ³ Turn the knurled screw o until it is tight. To adjust the halogen floodlight e, use the knurled screw t, the fixing screw f and the floodlight lever w. The horizontal position is adjusted in that the knurled screw t is loosened and, with the assistance of the floodlight lever w, it is placed in the desired position. Retighten the knurled screw t when the optimal position has been found. The vertical position is adjusted in that the fixing screw f is loosened and and, with the assistance of the floodlight lever w, it is placed in the desired position. [. . . ] Switch the appliance off with the ON/OFF switch q, remove the plug from the socket and allow the Floor Halogen Floodlight to cool down. Use a dry cloth to take out the halogen lamp. Check the connecting lead and the power plug for damages. [. . . ]