User manual KOMPERNASS LERVIA KH 94 DE-LUXE VACUUM CLEANER

[. . . ] This equipment is intended exclusively for domestic use. Never pull the plug out of the socket to switch off the vacuum cleaner. Never use the vacuum cleaner if the cable, plug or housing is damaged. Do not use the vacuum cleaner without a bag, or if the bag is damaged or full (look at the dust bag filling level indicator). [. . . ] Check that the outlet air filter 4 and motor filter 9 are correctly fitted. Using the vacuum cleaner 01. Place the vacuum cleaner in the horizontal working position. Attach the hose & so that it engages in the hose socket on the appliance. Connect the telescopic tube @ to the handle !Open the control fascia on the handle/remote control !and insert 2 micro batteries type LR03 /AAA as indicated. 6 05. 13. Set the telescopic tube into your required position by pressing the telescopic adjuster $ and pulling the bottom tube. Pull the plug `/mains cable out as far as you require. Press the foot switch ON/OFF 1 to switch the appliance on. All further settings can be made directly and easily using the handle/remote control !(see section »Remote control from handle«). For short pauses in work use the AUTO-POWER ON/OFF feature (automatic on/off switch). To do this, place the telescopic tube into the parking rail 5 ­ the appliance switches off and goes into stand-by mode. When you take the tube out of the parking rail - the appliance switches on again. You can then set the suction power you require as described below. Press the foot switch ON/OFF 1 again to switch the appliance off. After you have finished vacuuming always pull the plug ` out of the mains socket. Rewind the mains cable by actuating the foot switch 3 for the cable tidy on the vacuum cleaner. You can remove the hose & from the vacuum cleaner before storing. To take the hose out of the hose socket, press both buttons * at the end of the hose. Remote control from handle The handle/remote control · · · ! allows you to operate the vacuum cleaner conveniently, without bending down. Pull the mains cable out as far as you require and insert the plug ` into the mains socket. Press the foot switch ON/OFF 1 on the vacuum cleaner to switch it on. All further vacuuming functions can now be controlled from the handle: [AUTO] = automatic adjustment of the suction power; ensures that the suction power is automatically set to suit the type and structure of the surface to be cleaned. [. . . ] The outlet air filter 4 and the internal motor filter 9 should be cleaned regularly. Do not use any aggressive cleaning agents or solvents as these may attack the plastic. 8 Storing 01. Rewind the mains cable fully by actuating the foot switch on the vacuum cleaner. Store the vacuum cleaner in the vertical position. [. . . ]