User manual KONICA MINOLTA 4031-7785-02

[. . . ] User Manual [Additional Functions] www. konicaminolta. net Di2510/Di3010/Di3510 Di2510f/Di3510f Administrator Management Screens Administrator Settings Setting Machine Access Removing Penalties A maximum of 999 copies can be specified at one time with this machine. 1. 1 Administrator Management Screens 1 1. 1 Administrator Management Screens To display the Administrator Management screens This explains the method for displaying the Administrator Management screens. 1 Press the [Utility] key. Management]. 3 Use the 10-Key Pad to type in the 8-digit administrator code (Admin. Password), and then touch [Enter]. Note f the administrator code is incorrectly entered, the message "Incorrect administrator code. [. . . ] To set the administrator access code 1 Follow the procedure described in "To display the Administrator Management screens" on page 1-1 to display the Administrator Management screen. 2 Touch [Admin. 3 Touch [Administrator Code Input]. 4 Touch [Current Code], and then use the 10-Key Pad to type in the currently specified 8-digit administrator code (Admin. Password). Press the [C] key to erase all entered text. To return to the previous screen, touch [Cancel]. Di2510/Di2510f/Di3010/Di3510/Di3510f 1-3 1 5 Touch [New Code], and then use the 10-Key Pad to type in the new 8-digit administrator code (Admin. Password). 1. 2 Administrator Settings Press the [C] key to erase all entered text. To return to the previous screen, touch [Cancel]. 6 Touch [Retype New Code], and then use the 10-Key Pad to retype the new 8-digit administrator code (Admin. Password). Press the [C] key to erase all entered text. To return to the previous screen, touch [Cancel]. 7 Touch [Enter]. Note If an incorrect administrator code is entered, an error message appears. The error message may appear in any of the following cases. The code entered beside "Current Code" does not match the registered administrator code. The code entered beside "New Code" is not an 8-digit number. The code entered beside "Retype New Code" does not match the code entered beside "New Code". If the "Access Lock" function is set to "ON", incorrectly typing the administrator code is counted as an incorrect attempt to access the machine. After three incorrect attempts to access the machine, even if the correct administrator code is entered on a later attempt, an error message appears and the administrator code cannot be changed. To change the administrator code, turn the machine off, then on again, and then type in the correct administrator code. 1-4 Di2510/Di2510f/Di3010/Di3510/Di3510f 1. 3 Setting Machine Access 1 1. 3 Setting Machine Access Access Lock The "Access Lock" function is used to specify whether ("On") or not ("Off") access to Administrator mode, lock jobs and user boxes is monitored. If the "Access Lock" function is set to "On", the number of incorrect attempts to access Administrator mode, lock jobs and user boxes is counted. [. . . ] In addition, to allow access after incorrect attempts to access Administrator mode, turn the machine off, then on again. Di2510/Di2510f/Di3010/Di3510/Di3510f 1-7 1 1. 4 Removing Penalties 1-8 Di2510/Di2510f/Di3010/Di3510/Di3510f Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. 2004. 5 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan 4031-7785-02 [. . . ]