User manual KONICA MINOLTA 4343-7704-02

[. . . ] 4343-7704-02 Quick Guide PageScope Net Care Foreword Welcome · Minolta PageScope Net Care is utility software that provides central control over printers, copiers, and other devices on a network. With Minolta PageScope Net Care, you can use a Web browser to check the status of each device on a network and configure device settings. Minolta PageScope Net Care uses SNMP, which is standard network protocol, which means it can be used to manage Minolta devices, as well as other network devices that support standard Printer-MIB. Minolta PageScope Net Care is implemented based on Java 2 technologies, enabling functions and operations that are equivalent to those found on a most platforms that support Java. [. . . ] See "6. 9 Registering Users and Unregistering Users" (p. · Custom Group Setting Initialize: Selecting this option deletes all group information configured on the Custom Group Setting screen. See "6. 10 Configuring Custom Group Settings" (p. · Remove All Devices: Selecting this option deletes all device information entered in the list on the List Manager screen. See "6. 3 Selecting Managed Devices" (p. In the Java mode, a dialog box appears confirming whether you really want to initialize the selected settings. The confirmation dialog box does not appear in the HTML mode. 2. 31 6 Configuring PageScope Net Care Settings 6. 3 Selecting Managed Devices Use the procedure below to select specific devices for management from among those discovered on the network. Only the devices selected here are listed as managed devices on the Device Management menu. Displaying the List Manager screen Double-click the List Manager icon (single-click in the HTML mode). If you are using a Java mode and the Server Setting menu tree is not expanded, double-click the following icons: Server Setting List Manager List Manager. To select managed devices 1. The devices discovered on the network are displayed on the List Manager screen. To refresh the device information on the list, click the button. All discovered devices are initially selected as managed devices. To deselect a device, clear its check box in the Manage column. After everything is the way you want, click the Apply button. To cancel your settings, click the Cancel button instead of Apply. 2. 3. 32 6 Configuring PageScope Net Care Settings 6. 4 Removing a Managed Device You can use the List Manager screen to remove a device found on the network from the PageScope Net Care database when you no longer need it. Displaying the List Manager screen Double-click the List Manager icon (single-click in the HTML mode). If you are using a Java mode and the Server Setting menu tree is not expanded, double-click the following icons: Server Setting List Manager List Manager. To remove a device 1. Click the down arrow button above the pane along the left side of the screen, and then select Remove Device on the list that appears. If you are using the HTML mode, select Remove Device in the control menu and then click the Go button. On the list that appears, select the check box in the Remove column next to the device you want to remove. After everything is the way you want, click the Apply button. To cancel your settings, click the Cancel button instead of Apply. 2. [. . . ] Refer to the User Manual included with the device. 90 10 Obtaining Counter Information by E-Mail and Viewing It 10. 3 Specifying Initial PageScope Net Care Server Settings for Using This Function--1 (This procedure is performed from the PageScope Net Care server. ) 1. Click the down arrow button above the pane along the left side of the window, and then select Server Setting in the list that appeared. If you are using the HTML mode, select Server Setting in the list, and then click the Go button. Double-click the E-mail Setting icon, then the E-mail Function / Server icon (single-click in the HTML mode) in the Server Setting menu tree. 2. 3. [. . . ]