User manual KONICA MINOLTA 7045 USG

[. . . ] Recycled paper is used for the inside pages of this book. Konica 7045 Workgroup Document SystemTM User's Manual ENERGY STAR® Program The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. As an ENERGY STAR Partner, Konica Corporation, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency grounding it on the following features. Auto Low Power This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto Low Power operates automatically when 15 minutes have elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time. [. . . ] Similarly, 2-1 Upside Down rearranges the reverse sides of duplex originals which read upside down to make normal simplex copies. Ì 1-2 Upside Down functions only when 1-2 copy mode is selected. Ì 2-1 Upside Down functions only when 2-1 copy mode is selected and RADF is used. Ì Incompatible Basic Copying Conditions 1-2 Upside Down: 1-1, 2-2, 2-1 2-1 Upside Down: 1-1, 1-2, 2-2 Ì Incompatible Output Modes: None Ì Incompatible Applications: Combination, Booklet, Transparency Interleaving and Thin/Thick Paper in Special Paper (1-2 Upside Down only), Book Copy, Special Original (Mixed Original, Non-Standard Size), Repeat, AUTO Layout, Image Shift, Non-Image Area Erase, OVERLAY 1-2 Upside Down 1 2-1 Upside Down 3 3 1 2 2 1 3 2 Simplex originals 2 Left/Right bound duplex originals 1 3 3 3 1 1 2 3 2 1 Left/Right bound duplex copies 1 2 2 3 1 3 Top/Bottom bound duplex copies 8-28 Applications 2 Top/Bottom bound duplex originals 1 3 2 Simplex copies Applications Special Original (continued) Upside Down (continued) Application Selection Screen Special Original Screen 1-2 Upside Down Screen 2-1 Upside Down Screen 1 Press [APPLICATION] on the control panel to display the Application Selection Screen. 2 Touch Special Original to display the Special Original Screen. 3 Touch 1-2 Upside down or 2-1 Upside down, as desired. The subsequent screen for selecting binding type will be displayed. 4 Touch to select the binding type of copies/originals, then touch OK to return to the Special Original Screen. 5 Touch OK to complete the setting and return to the Application Selection Screen. 6 Make additional application selections, or touch OK to return to the Basic Screen. 7 Enter the desired print quantity from the control panel keypad. 8 Position original(s) FACE UP in the document feeder. After copying is completed, press [AUTO RESET] to release the mode and reset the machine. Applications 8-29 Applications Text/Photo Enhance Use this function to enhance the reproducibility of half tones so that the copy quality more closely matches that of the original. Photo Mode Use the Photo mode to reproduce a half-tone photo image. The copy will closely represent the half-tones of the original image. Text Mode Use the Text mode when copying the text original. In this mode, text is improved in comparison to using the general mode. Increase Contrast Mode Select Increase Contrast to darken lightly printed images (e. g. , pencil) without changing background exposure. In cases where the image is light and background is dark, the background will not be changed. Ì Incompatibles: None Original Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Standard Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Photo mode Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Konica Corporation Original Standard Increase contrast mode Original Standard Text mode NOTE: The key operator can set the copier to shift each of nine density levels into two levels of lighter and three levels of darker for each of the four modes, i. e. , Text/Photo (general), Text, Photo, and Increase Contrast. 11-54. 8-30 Applications Applications Text/Photo Enhance (continued) Application Selection Screen Text/Photo Enhance Screen 1 Press [APPLICATION] on the control panel to display the Application Selection Screen. 2 Touch Text/Photo Enhance to enter the Text/Photo Enhance Screen. 3 Touch TEXT, PHOTO, or INCREASE CONTRAST, as required. 4 Touch OK to return to the Application Selection Screen. [. . . ] If desired, ask your Konica service representative to enable the machine to default to 1. 00 magnification in this situation. SHEET INSERTION RESULT IS NOT AS EXPECTED Blank insertion: Be sure manuscript originals do not already include blank sheets in the locations designated for sheet insertion. Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right hand side in the finished set, insertion sheets must be designated on the page setting screen with odd numbers, not even. If required, make an even numbered original page odd by inserting a blank sheet in front of that page, so that the blank sheet is even and the insertion sheet is odd. FINISHER STAPLE RESULT IS NOT AS EXPECTED The 2 staple position functions only on copy paper that is loaded vertically (portrait style). Troubleshooting 13-13 Section 14 : Machine Specifications Specifications Machine Specifications 14-1 Specifications Product Name Konica 7045 Configuration Console with stationary platen Photoreceptor OPC drum Method Laser Electrostatic Toner Black, cartridge type Recommended Operating Environment 50°~86°F (10°~30°C); 10~80% RH Warm Up Approx. @68°(20°C); 50% RH Auto Reset Off/30 sec. /1 min. /1. 5 min. /2 min. /2. 5 min. / 3 min. /3. 5 min. /4 min. /4. 5 min. /5 min. [. . . ]